Table of Contents
Advertisement
NOTE1. If you install Windows
to manage (create, convert, delete, or rebuild) RAID functions on SATA / SATAII
HDDs, you still need to set up "SATA Operation Mode" to [RAID] in BIOS first. Then,
please set the RAID configuration by using the Windows RAID installation guide in
the following path in the Support CD:
.. \ RAID Installation Guide
NOTE2. Currently, if you install Windows
and there are no SATA / SATAII device used, please set up "SATA Operation Mode"
to [IDE] in BIOS.
2.18
2.18
2.18 Installing Windows
2.18
2.18
Installing Windows
Installing Windows
Installing Windows
Installing Windows
Vista
Vista
Vista
64-bit / XP / XP 64-bit Without RAID Functions
64-bit / XP / XP 64-bit Without RAID Functions
64-bit / XP / XP 64-bit Without RAID Functions
Vista
Vista
64-bit / XP / XP 64-bit Without RAID Functions
64-bit / XP / XP 64-bit Without RAID Functions
TM
TM
TM
TM
TM
If you want to install Windows
on your SATA / SATAII HDDs without RAID functions, please follow below procedures
according to the OS you install.
2.18.1 Installing Windows
2.18.1 Installing Windows
2.18.1 Installing Windows
2.18.1 Installing Windows
2.18.1 Installing Windows
F F F F Functions
unctions
unctions
unctions
unctions
If you want to install Windows
RAID functions, please follow below steps.
Using SATA / SATAII HDDs and eSATAII devices with NCQ and Hot Plug functions
STEP 1: Set Up BIOS.
A.
Enter BIOS SETUP UTILITY
Configuration.
B.
Set the "SATA Operation Mode" option to [IDE].
STEP 2: Make a SATA / SATAII driver diskette.
Make a SATA / SATAII driver diskette by following section 2.17.1 step 2 on page
47.
STEP 3: Set Up BIOS.
A.
Enter BIOS SETUP UTILITY
Configuration.
B.
Set the "SATA Operation Mode" option to [AHCI].
STEP 4: Install Windows
You can start to install Windows
of Windows
setup, press F6 to install a third-party AHCI driver. When prompted,
®
insert the SATA / SATAII driver diskette containing the AMD AHCI driver. After reading the
floppy disk, the driver will be presented. Select the driver to install according to the OS
you install. (Select "AMD AHCI Compatible RAID Controller-x86 platform" for Windows
XP, or "AMD AHCI Compatible RAID Controller-x64 platform" for Windows
7 / 7 64-bit / Vista
/ Vista
®
TM
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
7 / 7 64-bit / Vista
7 / 7 64-bit / Vista
7 / 7 64-bit / Vista
7 / 7 64-bit / Vista
® ® ® ® ®
7 / 7 64-bit / Vista
/ Vista
®
TM
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
® ® ® ® ®
XP / XP 64-bit on your SATA / SATAII HDDs without
®
Advanced screen
Advanced screen
®
XP / XP 64-bit OS on your system.
XP / XP 64-bit OS on your system. At the beginning
®
4 9
4 9
4 9
4 9
4 9
64-bit on IDE HDDs and want
TM
/ Vista
64-bit on IDE HDDs
TM
TM
/ / / / /
TM
TM
TM
TM
TM
64-bit / XP / XP 64-bit OS
TM
Storage
Storage
XP 64-bit.)
®
®
Advertisement
Table of Contents
