ASROCK M3A785GM-LE-128M Installation Manual
  1. Manuals
  2. Brands
  3. ASROCK Manuals
  4. Motherboard
  5. M3A785GM-LE/128M
  6. Installation manual
ASROCK M3A785GM-LE-128M Installation Manual

ASROCK M3A785GM-LE-128M Installation Manual

Hide thumbs Also See for M3A785GM-LE-128M:
Table of Contents

Advertisement

Quick Links

Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or trans-
lated in any language, in any form or by any means, except duplication of documen-
tation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identifica-
tion or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or omissions
that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any kind,
either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose. In no event shall
ASRock, its directors, officers, employees, or agents be liable for any indirect, special,
incidental, or consequential damages (including damages for loss of profits, loss of
business, loss of data, interruption of business and the like), even if ASRock has been
advised of the possibility of such damages arising from any defect or error in the guide
or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic
substance controlled in Perchlorate Best Management Practices (BMP) regulations
passed by the California Legislature. When you discard the Lithium battery in
California, USA, please follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate"
ASRock Website: http://www.asrock.com
Copyright©2009 ASRock INC. All rights reserved.
ASRock
Published October 2009
M3A785GM-LE/128M
Motherboard
1 1 1 1 1

Advertisement

Table of Contents
loading

Related Manuals for ASROCK M3A785GM-LE-128M

Summary of Contents for ASROCK M3A785GM-LE-128M

  • Page 1 ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.

  • Page 2: Motherboard Layout

    Fifth SATAII Connector (SATAII_5 (PORT 4)) Internal Audio Connector: CD1 (Black) Fourth SATAII Connector (SATAII_4 (PORT 3)) PCI Slots (PCI1- 2) Southbridge Controller PCI Express 2.0 x16 Slot (PCIE2; Green) Chassis Speaker Header PCI Express 2.0 x1 Slot (PCIE1; Green) (SPEAKER 1, Purple) Northbridge Controller...
  • Page 3 USB 2.0 Ports (USB23) Line In (Light Blue) PS/2 Keyboard Port (Purple) Front Speaker (Lime) * There are two LED next to the LAN port. Please refer to the table below for the LAN port LED indications. LAN Port LED Indications ACT/LINK...

  • Page 4: Package Contents

    ASRock’s commit- ment to quality and endurance. In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-step guide to the hardware installation. Chapter 3 and 4 contain the configuration guide to BIOS setup and information of the Support CD.

  • Page 5: Specifications

    - Micro ATX Form Factor: 9.6-in x 7.8-in, 24.4 cm x 19.8 cm - Support for Socket AM3 processors: AMD Phenom II X4 / X3 / X2 (except 920 / 940) and Athlon II X4 / X3 / X2 processors - Supports AMD OverDrive...
  • Page 6 - 1 x VGA/D-Sub Port - 1 x VGA/DVI-D Port - 6 x Ready-to-Use USB 2.0 Ports - 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED) - HD Audio Jack: Line in/Front Speaker/Microphone Connector - 6 x Serial ATAII 3.0Gb/s connectors, support RAID (RAID 0, RAID 1, RAID 10 and JBOD), NCQ, AHCI and “Hot Plug”...
  • Page 7 Overclocking may affect your system stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.
  • Page 8 USB flash drive or hard drive must use FAT32/16/12 file system. 12. The software name itself – OC DNA literally tells you what it is capable of. OC DNA, an exclusive utility developed by ASRock, provides a conve- nient way for the user to record the OC settings and share with others.
  • Page 9 15. EuP, stands for Energy Using Product, was a provision regulated by European Union to define the power consumption for the completed system. According to EuP, the total AC power of the completed system shall be under 1.00W in off mode condition. To meet EuP standard, an EuP ready motherboard and an EuP ready power supply are required.

  • Page 10: Minimum Hardware Requirement For 1080P Blu-Ray (Bd) / Hd-Dvd Playback Support

    7 / 7 64-bit / Vista / Vista 64-bit * If you need to use CyberLink PowerDVD Ultra version 7.3, we suggest to disable Hardware Acceleration function for better playback performance and compatibility. After executing CyberLink PowerDVD Ultra program, please follow below steps to disable Hardware Acceleration function.

  • Page 11: Pre-Installation Precautions

    Installation Installation Installation This is a Micro ATX form factor (9.6-in x 7.8-in, 24.4 cm x 19.8 cm) motherboard. Before you install the motherboard, study the configuration of your chassis to en- sure that the motherboard fits into it. Pre-installation Precautions...

  • Page 12: Installation Of Cpu Fan And Heatsink

    Step 4. When the CPU is in place, press it firmly on the socket while you push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked.

  • Page 13: Installation Of Memory Modules (Dimm)

    Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.

  • Page 14: Expansion Slots (Pci And Pci Express Slots)

    2.4 Expansion Slots (PCI and PCI Express Slots) 2.4 Expansion Slots (PCI and PCI Express Slots) There are 2 PCI slots and 2 PCI Express slots on this motherboard. PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. PCIE slots: PCIE1 (PCIE x1 slot;...

  • Page 15: Dual Monitor And Surround Display Features

    DVI-D and D-sub can drive same or different display contents. To enable dual monitor feature, please follow the below steps: 1. Connect the DVI-D monitor cable to the VGA/DVI-D port on the I/O panel. And connect the D-Sub monitor cable to the VGA/D-Sub port on the I/O panel.
  • Page 16 [512MB] to enable the function of VGA/D-sub. Please make sure that the value you select is less than the total capability of the system memory. If you do not adjust the BIOS setup, the default value of “Share Memory”, [Auto], will disable VGA/D-Sub function when the add-on VGA card is inserted to this motherboard.
  • Page 17 - such as a computer, DVD player or set-top box - and the digital display, or receiver - such as a monitor, television or projector. In other words, HDCP specification is designed to protect the integrity of content as it is being transmitted.
  • Page 18 VGA driver installed in your system. Step 5. Install the onboard VGA driver from our support CD to your system for both the onboard VGA and the discrete graphics card. Step 6. Restart your computer. Then you will find “ATI Catalyst Control Center” on ®...
  • Page 19 * Hybrid CrossFireX appearing here is a registered trademark of ATI Technologies Inc., and is used only for identification or explanation and to the owners’ benefit, without intent to infringe. * For further information of ATI Hybrid CrossFireX technology, please check AMD website for up dates and details.

  • Page 20: Jumpers Setup

    After waiting for 15 seconds, use a jumper cap to short pin2 and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear the CMOS right after you update the BIOS.

  • Page 21: Onboard Headers And Connectors

    (33-pin FLOPPY1) (see p.2 No. 25) the red-striped side to Pin1 Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the connector. Primary IDE connector (Blue) (39-pin IDE1, see p.2 No. 10) connect the black end...
  • Page 22 USB 2.0 Headers Besides six default USB 2.0 ports on the I/O panel, there are (9-pin USB10_11) three USB 2.0 headers on this (see p.2 No. 24) motherboard. Each USB 2.0 header can support two USB 2.0 ports. (9-pin USB8_9) (see p.2 No.
  • Page 23 HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system. 2. If you use AC’97 audio panel, please install it to the front panel audio header as below: A.
  • Page 24 Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3.
  • Page 25 Driver Installation Guide Driver Installation Guide To install the drivers to your system, please insert the support CD to your optical drive first. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers.

  • Page 26: Installing Windows

    ” page, please insert the ASRock Support CD into your optical drive, and click the “Load Driver” button on the left on the bottom to load the AMD AHCI drivers. AMD AHCI drivers are in the following path in our Support CD: ®...

  • Page 27: Bios Information

    Untied Overclocking function, please enter “Overclock Mode” option of BIOS setup to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is untied during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can operate under a more stable overclocking environment.
  • Page 28 Wir danken Ihnen für den Kauf des ASRock M3A785GM-LE/128M Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.

  • Page 29: Spezifikationen

    - Micro ATX-Formfaktor: 24.4 cm x 19.8 cm; 9.6 Zoll x 7.8 Zoll - Unterstützung von Socket AM3-Prozessoren: AMD Phenom II X4 / X3 / X2 (außer 920 / 940) und Athlon X4 / X3 / X2- Prozessor - Unterstützt AMD OverDrive...
  • Page 30 - 1 x PS/2-Tastaturanschluss - 1 x VGA/D-Sub port - 1 x VGA/DVI-D port - 6 x Standard-USB 2.0-Anschlüsse - 1 x RJ-45 LAN Port mit LED (ACT/LINK LED und SPEED LED) - HD Audiobuchse: Audioeingang / Lautsprecher vorne / Mikrofon Anschlüsse - 6 x SATAII-Anschlüsse, unterstützt bis 3.0 Gb/s...
  • Page 31 Beachten Sie bitte, dass Overclocking, einschließlich der Einstellung im BIOS, Anwenden der Untied Overclocking-Technologie oder Verwenden von Overclocking-Werkzeugen von Dritten, mit einem gewissen Risiko behaftet ist. Overclocking kann sich nachteilig auf die Stabilität Ihres Systems auswirken oder sogar Komponenten und Geräte Ihres Systems beschädigen.
  • Page 32 1080p Blu-ray (BD)/HD-DVD Playback Unterstützung auf dieser Hauptplatine fordert die passende Hardwarekonfiguration. Bitte verweisen Sie auf Seite 10 für minimal Hardware Anforderung und die überschritten 1080p Blu-ray (BD)/HD-DVD Filme in unserem Laborversuch. Vor Installation der SATAII-Festplatte an den SATAII-Anschluss lesen Sie bitte “Setup-Anleitung für SATAII-Festplatte”...
  • Page 33 USB-Flash-Laufwerk oder die Festplatte das Dateisystem FAT32/16/12 benutzen muss. 12. Allein der Name – OC DNA* – beschreibt es wörtlich, was die Software zu leisten vermag. OC DNA ist ein von ASRock exklusiv entwickeltes Dienstprogramm, das Nutzern eine bequeme Möglichkeit bietet, Übertaktungseinstellungen aufzuzeichnen und sie Anderen mitzuteilen.

  • Page 34: Installation

    2. Installation 2. Installation 2. Installation Dies ist ein Motherboard mit einem Micro ATX-Formfaktor (9,6 Zoll x 7,8 Zoll, 24,4 cm x 19,8 cm). Vor Installation des Motherboards müssen Sie die Konfiguration Ihres Gehäuses dahingehend überprüfen, ob das Motherboard dort hineinpasst.
  • Page 35 2.1 CPU Installation 2.1 CPU Installation Schritt 1: Öffnen Sie den CPU-Sockel, indem sie den Hebel leicht zur Seite und dann nach oben ziehen, auf einen Winkel von 90°. Schritt 2: Positionieren Sie die CPU genau so über dem Sockel, dass sich die Ecke der CPU mit dem goldenen Dreieck exakt über der Ecke des...
  • Page 36 Zweikanal-Speichertechnologie zu aktivieren. Andernfalls erfolgt der Betrieb im Einkanal-Modus. 1. s ist nicht zulässig, DDR oder DDR2 in einen DDR3 Steckplatz zu installieren; andernfalls könnten Motherboard und DIMMs beschädigt werden. 2. Wenn Sie nur ein Speichermodul oder zwei nicht identische Speichermodule installieren, kann die Zweikanal-Speichertechnologie nicht aktiviert werden.
  • Page 37 Gehäuseschacht (Slot) , den Sie nutzen möchten und behalten die Schraube für den Einbau der Karte. Schritt 3: Richten Sie die Karte über dem Slot aus und drücken Sie sie ohne Gewalt hinein, bis sie den Steckplatz korrekt ausfüllt. Schritt 4: Befestigen Sie die Karte mit der Schraube aus Schritt 2.

  • Page 38: Einstellung Der Jumper

    +5VSB (Standby) zu setzen (siehe S.2, No. 2) und die PS/2 oder USB- Weckfunktionen zu aktivieren. Hinweis: Um +5VSB nutzen zu können, muss das Netzteil auf dieser Leitung 2A oder mehr leisten können. CMOS löschen (CLRCMOS1, 3-Pin jumper) (siehe S.2, No. 9)
  • Page 39 (33-Pin FLOPPY1) die rotgestreifte Seite auf Stift 1 (siehe S.2, No. 25) Hinweis: Achten Sie darauf, dass die rotgestreifte Seite des Kabel mit der Stift 1- Seite des Anschlusses verbunden wird. Primärer IDE-Anschluss (blau) (39-pin IDE1, siehe S.2, No. 10)
  • Page 40 Serial ATA- (SATA-) Sie können beide Enden des Datenkabel SATA-Datenkabels entweder mit der SATA / SATAII- (Option) Festplatte oder dem SATAII- Anschluss am Mainboard verbinden. USB 2.0-Header Zusätzlich zu den sechs üblichen USB 2.0-Ports an den (9-pol. USB10_11) I/O-Anschlüssen befinden sich (siehe S.2 - No.
  • Page 41 E. Rufen Sie das BIOS-Setup-Dienstprogramm auf. Wechseln Sie zu Erweiterte Einstellungen und wählen Sie Chipset-Konfiguration. Setzen Sie die Option Frontleistenkontrolle von [Automatisch] auf [Aktiviert]. F. Rufen Sie das Windows-System auf. Klicken Sie auf das Symbol in der Taskleiste unten rechts, um den Realtek HD Audio-Manager aufzurufen. Für Windows ®...
  • Page 42 Fan) bietet, können auch CPU-Lüfter mit dreipoligem Anschluss angeschlossen werden; auch ohne Geschwindigkeitsregulierung. Wenn Sie einen dreipoligen CPU-Lüfter an den CPU-Lüferanschluss dieses Motherboards anschließen möchten, verbinden Sie ihn bitte mit den Pins 1 – 3. Pins 1–3 anschließen Lüfter mit dreipoligem Anschluss installieren...
  • Page 43 Anschließend werden die mit Ihrem System kompatiblen Treiber automatisch erkannt und auf dem Bildschirm angezeigt. Zur Installation der nötigen Treiber gehen Sie bitte der Reihe nach von oben nach unten vor. Nur so können die von Ihnen installierten Treiber richtig arbeiten.

  • Page 44: Installation Von Windows

    XP 64-Bit, Windows Vista oder Windows Vista 64-Bit ohne RAID-Funktionalität auf Ihren SATA / SATAII-Festplatten installieren, dann folgen Sie bitte je nach dem zu installierenden Betriebssystem den folgenden Schritten. 2.9.1 Installation von Windows 2.9.1 Installation von Windows 2.9.1 Installation von Windows 2.9.1 Installation von Windows...
  • Page 45 64-Bit Betriebssystem auf Ihrem System zu installieren. Wenn die Frage “Wo möchten Sie Windows installieren?” erscheint, legen Sie bitte die ASRock Support CD in Ihr optisches Laufwerk ein. Klicken Sie anschließend die “Treiber laden”-Schaltfläche links unten, um die AMD AHCI-Treiber zu installieren. Die AMD AHCI-Treiber befinden sich in dem folgenden Verzeichnis auf der Support CD: ..
  • Page 46 Erscheint der Wilkommensbildschirm nicht, so “doppelklicken” Sie bitte auf das File ASSETUP.EXE im BIN-Verzeichnis der Support-CD, um die Menüs aufzurufen. Das Setup-Programm soll es Ihnen so leicht wie möglich machen. Es ist menügesteuert, d.h. Sie können in den verschiedenen Untermenüs Ihre Auswahl treffen und die Programme werden dann automatisch installiert.

  • Page 47: Contenu Du Paquet

    Contenu du paquet Contenu du paquet Carte mère ASRock M3A785GM-LE/128M (Facteur de forme Micro ATX: 9.6 pouces x 7.8 pouces, 24.4 cm x 19.8 cm) Guide d’installation rapide ASRock M3A785GM-LE/128M CD de soutien ASRock M3A785GM-LE/128M Un câble ruban IDE Ultra ATA 66/100/133 80 conducteurs Deux câble de données Serial ATA (SATA) (Optionnelle)

  • Page 48: Spécifications

    9.6 pouces x 7.8 pouces, 24.4 cm x 19.8 cm - Prise en charge des processeurs sur socket AM3: Processeur Phenom II X4 / X3 / X2 (sauf 920 / 940) et Athlon II X4 / X3 / X2 d’AMD - Prise en charge d’AMD OverDrive avec fonction ACC (Advanced Clock Calibration ou calibrage d’horloge avancé)
  • Page 49 - br. 24 connecteur d’alimentation ATX - br. 4 connecteur d’alimentation 12V ATX - Connecteurs audio internes - Connecteur audio panneau avant - 3 x En-tête USB 2.0 (prendre en charge 6 ports USB 2.0 supplémentaires) (voir ATTENTION 8) BIOS - 8Mb BIOS AMI - BIOS AMI - Support du “Plug and Play”...
  • Page 50 - FCC, CE, WHQL - Prêt pour EuP (alimentation Prêt pour EuP requise) (voir ATTENTION 15) * Pour de plus amples informations sur les produits, s’il vous plaît visitez notre site web: http://www.asrock.com ATTENTION Il est important que vous réalisiez qu’il y a un certain risque à effectuer l’overclocking, y compris ajuster les réglages du BIOS, appliquer la technologie Untied Overclocking, ou...
  • Page 51 Avant d’installer le disque dur SATAII au connecteur SATAII, veuillez lire le Guide « Installation du disque dur SATAII » à la page 28 du « Manuel de l’utilisateur » qui se trouve sur le CD de support pour régler votre lecteur de disque dur SATAII au mode SATAII.
  • Page 52 EuP sont requises. Selon les suggestions d’Intel’, l’alimentation électrique EuP doit correspondre à la norme, qui est que l’efficacité électrique de 5v en mode de veille doit être supérieure à 50% pour 100 mA de consommation de courant. Pour choisir une alimentation électrique conforme à...
  • Page 53 2. Installation 2. Installation Il s’agit d’une carte mère à facteur de forme Micro ATX (9,6 po x 7,8 po, 24,4 cm x 19,8 cm). Avant d’installer la carte mère, étudiez la configuration de votre châssis pour vous assurer que la carte mère s’y insère.
  • Page 54 Etape 1. Déverrouillez le support en relevant le levier selon un angle de 90 Etape 2. Placer l’UC directement au-dessus de la prise pour que le coin de l’UC avec son triangle jaune coïncide avec le petit triangle dans le coin de la prise.
  • Page 55 DDR3 DIMM pour activer la technologie Dual Channel Memory. Sinon, le système fonctionnera en mode Canal unique. 1. Il n’est pas permis d’installer de la DDR ou DDR2 sur le slot DDR3; la carte mère et les DIMM pourraient être endommagés.

  • Page 56: Installation D'une Carte D'extension

    Slot d’extension (Slots PCI et Slots PCI Express) Slot d’extension (Slots PCI et Slots PCI Express) Il y a 2 ports PCI et 2 ports PCI Express sur la carte mère M3A785GM-LE/128M. Slots PCI: Les slots PCI sont utilisés pour installer des cartes d’extension dotées d’une interface PCI 32 bits.
  • Page 57 Toutefois, veuillez ne pas effacer la CMOS tout de suite après avoir mis le BIOS à jour. Si vous avez besoin d’effacer la CMOS lorsque vous avez fini de mettre le BIOS à jour, vous devez d’abord initialiser le système, puis le mettre hors tension avant de procéder à...
  • Page 58 (FLOPPY1 br. 33) le côté avec fil rouge côté Broche1 (voir p.2 fig. 25) Note: Assurez-vous que le côté avec fil rouge du câble est bien branché sur le côté Broche1 du connecteur. Connecteur IDE primaire (bleu) (IDE1 br. 39, voir p.2 No. 10)
  • Page 59 Câble de données Toute cote du cable de data SATA Série ATA (SATA) peut etre connecte au disque dur SATA / SATAII ou au connecteur (en option) SATAII sur la carte mere. En-tête USB 2.0 A côté des six ports USB 2.0 par défaut sur le panneau...
  • Page 60 1. L’audio à haute définition (HDA) prend en charge la détection de fiche, mais le fil de panneau sur le châssis doit prendre en charge le HDA pour fonctionner correctement. Veuillez suivre les instructions dans notre manuel et le manuel de châssis afin installer votre système.
  • Page 61 (voir p.2 fig. 6) ien que cette carte mère offre un support de (Ventilateur silencieux) ventilateur de CPU à 4 broches , le ventilateur de CPU à 3 broches peut bien fonctionner même sans la fonction de commande de vitesse du ventilateur.
  • Page 62 Puis, les pilotes compatibles avec votre système peuvent être détectés automatiquement et sont listés sur la page du pilote du CD. Veuillez suivre l’ordre de haut en bas sur le côté pour installer les pilotes requis. En conséquence, les pilotes que vous installez peuvent fonctionner correctement.
  • Page 63 XP / XP 64-bit sur vos disques durs SATA / SATAII sans fonctions RAID, veuillez suivre la procédure ci-dessous. Utilisation des disques durs SATA / SATAII sans NCQ et les fonctions de connexion à chaud ETAP 1: Configurez le BIOS.
  • Page 64 “Où souhaitez-vous installer Windows ?”, veuillez insérer le CD Support d’ ASRock dans votre lecteur optique, et cliquer sur le bouton “Charger le pilote” en bas à gauche pour charger les pilotes AHCI AMD. Les pilotes AHCI AMD sont sous le chemin suivant du CD Support: ..
  • Page 65 BIOS après le POST, veuillez redémarrer le système en pressant <Ctl> + <Alt> + <Suppr>, ou en pressant le bouton de reset sur le boîtier du système. Vous pouvez également redémarrer en éteignant le système et en le rallumant.
  • Page 66 1. Introduzione Grazie per aver scelto una scheda madre ASRock M3A785GM-LE/128M, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza. Questa Guida Rapida all’Installazione contiene l’introduzione alla motherboard e la guida passo-passo all’installazione.
  • Page 67 - Micro ATX Form Factor: 9.6-in x 7.8-in, 24.4 cm x 19.8 cm Processore - Supporto di processori Socket AM3: AMD Phenom II X4 / X3 / X2 (fatta eccezione per 920 / 940) e Athlon II X4 / X3 / X2 - Supporta AMD OverDrive con funzione ACC (Advanced Clock Calibration) - Supporto tecnologia AMD Cool ‘n’...
  • Page 68 - 1 x Porta VGA/D-Sub - 1 x Porta VGA/DVI-D - 6 x Porte USB 2.0 già integrate - 1 x porte LAN RJ-45 con LED (LED azione/collegamento e LED velocità) - Connettore HD Audio: ingresso linea / cassa frontale / microfono Connettori - 6 x connettori SATAII 3.0Go/s, sopporta RAID (RAID 0, RAID 1,...
  • Page 69 * Per ulteriori informazioni, prego visitare il nostro sito internet: http://www.asrock.com AVVISO Si prega di prendere atto che la procedura di overclocking implica dei rischi, come anche la regolazione delle impostazioni del BIOS, l’applicazione della tecnologia Untied Overclocking Technology, oppure l’uso di strumenti di overclocking forniti da terzi. L’overclocking può...
  • Page 70 Il supporto per riproduzione 1080p Blu-ray (BD) / HD-DVD sulla scheda madre richiede una corretta configurazione hardware. Prego fare riferimento alla pagina 10 per i requisiti minimi hardware e per il test 1080p Blu-ray (BD) / HD-DVD del nostro laboratorio.
  • Page 71 12. Il nome stesso del software – OC DNA – dice di cosa è capace. OC DNA, una utilità esclusiva sviluppata da ASRock, fornisce un modo comodo per registrare le impostazioni OC e condividerle con gli altri. Aiuta a salvare le registrazioni di overclocking nel sistema operativo e semplifica la complicata procedura di registrazione delle impostazioni di overclocking.
  • Page 72 2. Installazione Questa è una scheda madre con Form Factor Micro ATX (9.6 pollici x 7.8 pollici; 24,4 cm x 19,8 cm). Prima di installare la scheda madre, studiare la configurazione del telaio per assicurarsi che la scheda madre vi si adatti.
  • Page 73 2.1 Installazione del processore Step 1. Aprire lo zoccolo sollevando la leva da un angolo di 90°. Step 2. Posizionare la CPU direttamente sopra la presa in modo tale che l’angolo della CPU con il triangolo dorato corrisponda all’angolo della presa con il triangolino.
  • Page 74 2.3 Installazione dei moduli di memoria (DIMM) La motherboard M3A785GM-LE/128M dispone di due slot DIMM DDR3 (Double Data Rate 3) a 240 pin e supporta la tecnologia Dual Channel Memory. Per attivare la configurazione Dual Channel Memory bisogna installare sempre due moduli di memoria identici (stessa marca, velocità, dimensioni e tipo di chip) negli slot DIMM.
  • Page 75 Step 2. Rimuovere i ganci sullo slot che si intende utilizzare. Tenere a portata di mano le viti. Step 3. Allineare il connettore della scheda con lo slot e premere con decisione finché...
  • Page 76 Quando il ponticello è posizionato sui pin, il jumper è “CORTOCIRCUITATO”. Se sui pin non ci sono ponticelli, il jumper è “APERTO”. L’illustrazione mostra un jumper a 3 pin in cui il pin1 e il pin2 sono “CORTOCIRCUITATI” quando il ponticello è CORTOCIRCUITATO APERTO posizionato su questi pin.
  • Page 77 (33-pin FLOPPY1) (vedi p.2 item 25) Lato del Pin1 con la striscia rossa Nota: Assicurarsi che il lato del cavo con la striscia rossa sia inserito nel lato Pin1 del connettore. Connettore IDE primario (blu) (39-pin IDE1, vedi p.2 Nr. 10)
  • Page 78 Cavi dati Serial ATA (SATA) Entrambe le estremità del cavo dati SATA possono collegarsi (Opzionale) all’hard disk SATA / SATAII o al connettore SATAII sulla scheda madre. Collettore USB 2.0 Oltre alle sei porte USB 2.0 predefinite nel pannello I/O, la...
  • Page 79 1. La caratteristica HDA (High Definition Audio) supporta il rilevamento dei connettori, però il pannello dei cavi sul telaio deve supportare la funzione HDA (High Definition Audio) per far sì che questa operi in modo corretto. Attenersi alle istruzioni del nostro manuale e del manuale del telaio per installare il sistema.
  • Page 80 Sebbene la presente scheda madre disponga di un supporto per ventola CPU a 4 piedini (ventola silenziosa), la ventola CPU a 3 piedini è in grado di funzionare anche senza la funzione di controllo della velocità della ventola. Se si intende collegare la ventola CPU a 3 piedini al connettore della ventola CPU su questa scheda madre, collegarla ai piedini 1-3.
  • Page 81 Quindi, i driver compatibili con il sistema vengono rilevati automaticamente ed elencati nella pagina del driver del CD in dotazione. Per l’installazione dei driver necessari, procedere in base ad un ordine dall’alto verso il basso. In tal modo, i driver installati funzioneranno correttamente.
  • Page 82 Windows?” (Dove si vuole eseguire l’istallazione di Windows), inserire il CD di supporto ASRock nell’unità ottica e fare clic sul pulsante “Carica driver” , in basso a sinistra, per caricare i driver AMD AHCI. I driver AMD AHCI si trova sul seguente percorso del CD di supporto: ..
  • Page 83 “Modalità Overclock” nelle impostazioni del BIOS per impostare la selezione da [Auto] a [CPU, PCIE, Async.]. A questo punto, la CPU FSB è “libera” durante l’overclocking, ma i bus PCI e PCIE sono nella modalità fissata in modo tale che l’FSB posa operare sotto un più stabile ambiente di overclocking.
  • Page 84 BIOS; altrimenti, POST continua con i suoi test di routine. Per entrare il BIOS Setup dopo il POST, riavvia il sistema premendo <Ctl> + <Alt> + <Delete>, o premi il tasto di reset sullo chassis del sistema. El BIOS Setup Utility es diseñádo “user-friendly”.
  • Page 85 ASRock. Esta Guía rápida de instalación contiene una introducción a la placa base y una guía de instalación paso a paso. Puede encontrar una información más detallada sobre la placa base en el manual de usuario incluido en el CD de soporte.
  • Page 86 Especificación Especificación Especificación Especificación Plataforma - Factor forma Micro ATX: 24,4 cm x 17,8 cm, 9,6” x 7,8” Procesador - Compatibilidad con procesadores con conector AM3: procesador AMD Phenom II X4 / X3 / X2 (excepto 920 / 940) y Athlon II X4 / X3 / X2 - Compatible con AMD OverDrive con la función ACC...
  • Page 87 - 1 x puerto VGA/D-Sub - 1 x puerto VGA/DVI-D - 6 x puertos USB 2.0 predeterminados - 1 x Puerto LAN RJ-45 con LED (LED de ACCIÓN/ENLACE y LED de VELOCIDAD) - Conexión de HD audio: Entrada de línea / Altavoz frontal / Micrófono...
  • Page 88 ADVERTENCIA Tenga en cuenta que hay un cierto riesgo implícito en las operaciones de aumento de la velocidad del reloj, incluido el ajuste del BIOS, aplicando la tecnología de aumento de velocidad liberada o utilizando las herramientas de aumento de velocidad de otros fabricantes.
  • Page 89 Que la velocidad de memoria de 1600 MHz se admita o no se admita, depende de la configuración AM3 Procesador que adopte. Si desea adoptar el módulo de memoria DDR3 1600 en esta placa base, consulte la lista de compatibilidad de memorias en nuestro sitio Web para obtener los módulos de memoria compatibles.
  • Page 90 ASRock Instant Flash. Ejecute esta herramienta y guarde el archivo correspondiente al sistema BIOS nuevo en su unidad flash USB, unidad de disco flexible o disco duro para poder actualizar el BIOS con sólo pulsar un par de botones, sin necesidad de preparar un disco flexible adicional ni utilizar complicadas utilidades de programación.

  • Page 91: Instalación

    2. Instalación 2. Instalación Esta placa base tiene un factor de forma Micro ATX (9,6 pulgadas x 7,8 pulgadas, 24,4 cm. x 19,8 cm). Antes de instalar la placa base, estudie la configuración de su chasis para asegurarse de que la placa base cabe en él.

  • Page 92: Instalación Del

    Paso 3. Coloque cuidosamente el CPU en el zócalo. El CPU se encaja al zócalo a una sola orientación. No esfuerce el CPU en el zócalo para prevenir encorvados de los pins del CPU. Si no puede encajar el CPU, examine su orientación o examine si los pins están ya...

  • Page 93: Instalación De Memoria

    Asegúrese de desconectar la fuente de alimentación antes de añadir o retirar módulos DIMM o componentes del sistema. Paso 1. Empuje los clips blancos de retención por el extremo de cada lado de la ranura de memoria. Paso 2. Encaje la muesca del DIMM hacia la cumbrera de la ranura.
  • Page 94 Paso 2. Quite la tapa que corresponde a la ranura que desea utilizar. Paso 3. Encaje el conector de la tarjeta a la ranura. Empuje firmemente la tarjeta en la ranura. Paso 4. Asegure la tarjeta con tornillos.
  • Page 95 3 para habilitar +5VSB (vea p.2, No. 2) (standby) para PS/2 o USB wake up events. Atención: Para elegir +5VSB, se necesita corriente mas que 2 Amp proveida por la fuente de electricidad. Limpiar CMOS (CLRCMOS1, jumper de 3 pins) (ver p.2, No.
  • Page 96 (vea p.2, No. 25) la banda roja debe quedar en el mismo lado que el contacto 1 Atención: Asegúrese que la banda roja del cable queda situado en el mismo lado que el contacto 1 de la conexión. IDE conector primario (azul) (39-pin IDE1, vea p.2, No.
  • Page 97 Cable de datos de Ambos extremos del cable serie ATA (SATA) pueden conectarse al disco duro SATA / SATAII o la (Opcional) conexión de la placa base. Cabezal USB 2.0 Además de seises puertos USB 2.0 predeterminados en el (9-pin USB10_11) panel de E/S, hay tre bases (ver p.2, No.
  • Page 98 2. Si utiliza el panel de sonido AC’97, instálelo en la cabecera de sonido del panel frontal de la siguiente manera: A. Conecte Mic_IN (MIC) a MIC2_L.
  • Page 99 Si pretende enchufar el ventilador de procesador de 3 contactos en el conector del ventilador de procesador de esta placa base, conéctelo al contacto 1-3. Contacto 1-3 conectado Instalación del ventilador de 3 contactos...
  • Page 100 Guía de instalación del controlador Guía de instalación del controlador Para instalar los controladores en el sistema, inserte en primer lugar el CD de soporte en la unidad óptica. A continuación, se detectarán automáticamente los controladores compatibles con el sistema y se mostrarán en la página de controladores de CD compatibles.
  • Page 101 Si desea instalar Windows XP / XP 64 bits en sus HDDs SATA / SATAII sin funciones RAID, por favor siga los pasos siguientes. Uso de dispositivos SATA / SATAII sin funciones NCQ y de Conexión en Caliente PASO 1: Configure BIOS.
  • Page 102 FSB disfruta un mayor margen debido a los buses fijos PCI / PCIE. Antes de que active la función de Forzado de Reloj (Overclocking) no relacionado, por favor entre a la opción de “Modo de Forzado de Reloj”...
  • Page 103 / Vista / Vista 64 bits / XP / XP Media Center / XP 64 bits El CD de instalación que acompaña la placa-base trae todos los drivers y programas utilitarios para instalar y configurar la placa-base. Para iniciar la instalación, ponga el CD en el lector de CD y se desplegará...
  • Page 104 é dotada de um projeto robusto que atende a ASRock de compromisso com a qualidade e durabilidade. Este Guia de Instalação Rápida apresenta a placa-mãe e o guia de instalação passo a passo. Mais informações detalhadas sobre a placa-mãe podem ser encontradas no manual do usuário do CD de suporte.
  • Page 105 - Formato Micro ATX: 9,6 pol. x 7,8 pol., 24,4 cm x 19,8 cm - Suporte para processadores AM3: Processador AMD Phenom II X4 / X3 / X2 (exceto 920 / 940) e Athlon II X4 / X3 / X2 - Suporta a tecnologia AMD OverDrive...
  • Page 106 - 1 x porta VGA/D-Sub - 1 x porta VGA/DVI-D - 6 x portas USB 2.0 padrão - 1 x porta LAN RJ-45 com LED (LED ACT/LIG e LED VELOCIDADE) - HD Áudio Jack: Entrada de linha / Altifalante frontal /...
  • Page 107 AVISO Tenha em atenção que a operação de overclocking envolve alguns riscos, nomeadamente no que diz respeito ao ajuste das definições do BIOS, à aplicação da tecnologia Untied Overclocking ou à utilização de ferramentas de overclocking de terceiros. O overclocking pode afectar a estabilidade do seu sistema ou até...
  • Page 108 Devido às limitações do sistema operativo, o tamanho real da memória pode ser inferior a 4 GB uma vez que uma parte desta está reservada para utilização pelo sistema operativo no âmbito do Windows ® XP e do Windows ®...
  • Page 109 Veuillez noter que le lecteur flash USB ou le disque dur doit utiliser le système de fichiers FAT32/16/12. 12. O próprio nome do software – OC DNA diz-lhe literalmente aquilo de que é capaz. OC DNA, um utilitário exclusivo desenvolvido pela ASRock, proporciona uma forma conveniente para o utilizador gravar as definições OC e partilhar com outros.

  • Page 110: Precauções Antes Da Instalação

    2. Instalação 2. Instalação M3A785GM-LE/128M é uma Micro ATX forma factor (9.6-in x 7.8-in, 24.4 cm x 19.8 cm) tábua principal. Antes de instalar a tábua principal, estude a configuração do seu chassi para assegurar que a tábua principal apropria a isto.
  • Page 111 º passo: insira com cuidado a CPU no soquete até que ela se encaixe no lugar. A CPU somente se encaixa em uma posição correta. NÃO force a CPU no soquete, para evitar que os pinos fiquem tortos.
  • Page 112 DIMM puxando para fora os seus clipes de retenção. Tranque o Nível de º passo: alinhe a DIMM no slot de forma que o entalhe da DIMM fique alinhado com a ranhura no slot. A DIMM somente se encaixa em uma orientação correta.
  • Page 113 Retire a tampa que cobre o slot que você deseja usar; reserve os parafusos para uso futuro. º passo: Alinhe o conector da placa com o slot e pressiona com firmeza, até que a placa esteja totalmente encaixada no slot. º...
  • Page 114 (veja a folha 2, No. 2) para PS/2 ou eventos de wake up na USB. Nota: Para escolher +5VSB, é preciso uma corrente de stand by de 2 A ou mais. Restaurar CMOS (CLRCMOS1, jumper de 3 pinos) (veja a folha 2, No. 9) Limpar o CMOS Configuração-...
  • Page 115 (veja a folha 2, No. 25) o lado com listras vermelhas para o Pino 1 Nota: Certifique-se de que o lado com listras vermelhas no cabo seja conectado ao lado Pino 1 do conector. Conector primário (Azul) (IDE1 de 39 pinos, veja a folha 2, No. 10)
  • Page 116 Cabo de dados Tanto a saída do cabo de Serial ATA (SATA) dados SATA pode ser conectado ao disco rígido (opcional) SATA / SATAII quanto o conector SATAII na placa mãe. Cabezal USB 2.0 Além das seis portas USB 2.0 por defeito no painel de (USB10_11 de 9 pinos) entrada/saída, há...
  • Page 117 Siga s instruções que aparecem no manual e no manual do chassis para instalar o sistema. 2. Se utilizar o painel de áudio AC’97, instale-o no cabeçalho de áudio do painel frontal, como a figura abaixo mostra: A. Ligue o Mic_IN (MIC) ao MIC2_L.
  • Page 118 (CPU_FAN1 de 4 pinos) (veja a folha 2, No. 6) Apesar de esta placa-mãe possuir 4 apoios para uma ventoinha de CPU (Ventoinha silenciosa), uma ventoinha de 3 pinos para CPU poderá funcionar mesmo sem a função de controlo de velocidade da ventoinha. Se pretender ligar uma ventoinha de 3 pinos para CPU ao conector de ventoinha do CPU nesta placa-mãe, por favor, ligue-a aos pinos 1-3.
  • Page 119 óptica em primeiro lugar. Depois, os controladores compatíveis com o seu sistema poderão ser detectados automaticamente e surgir na lista na página do controlador do CD de apoio. Por favor, siga a ordem de cima para baixo ao lado para instalar os controladores necessários. Assim, os controladores que instalar poderão funcionar devidamente.
  • Page 120 ® Vista de 64 bits nas suas unidades de disco rígido SATA / SATAII sem as funções RAID, siga as etapas a seguir descritas. Use SATA / SATAII HDDs sem NCQ e Hot Plug funções ETAPA 1: Aceda à BIOS.
  • Page 121 Mode” (Modo de overclock) da configuração da BIOS para definir a função de [Auto] para [CPU, PCIE, Async.]. Por outras palavras, o FSB da CPU é separado durante o overclocking, mas os buses PCI e PCIE permanecem fixos para que o FSB possa funcionar num ambiente de overclocking mais estável.
  • Page 122 7 de 64 bits / Vista / Vista de 64 bits / XP / Centro de multimedia XP / XP de 64 bits. O CD de instalação que acompanha a placa Mãe contem: drivers e utilitários necessários para um melhor desempenho da placa Mãe. Para começar a usar o CD de instalação, introduza o CD na leitora de CD-ROM do computador.
  • Page 123 1 4 2 1 4 2 1 4 2 1 4 2 1 4 2 ASRock M3A785GM-LE/128M Motherboard...
  • Page 124 ‘ ’ ® 1 4 3 1 4 3 1 4 3 1 4 3 1 4 3 ASRock M3A785GM-LE/128M Motherboard...
  • Page 125 1 4 4 1 4 4 1 4 4 1 4 4 1 4 4 ASRock M3A785GM-LE/128M Motherboard...
  • Page 126 ® “ ” ® ® ® ® “ ” “ ” 1 4 5 1 4 5 1 4 5 1 4 5 1 4 5 ASRock M3A785GM-LE/128M Motherboard...
  • Page 127 ® ® 1 4 6 1 4 6 1 4 6 1 4 6 1 4 6 ASRock M3A785GM-LE/128M Motherboard...
  • Page 128 1 4 7 1 4 7 1 4 7 1 4 7 1 4 7 ASRock M3A785GM-LE/128M Motherboard...
  • Page 129 1 4 8 1 4 8 1 4 8 1 4 8 1 4 8 ASRock M3A785GM-LE/128M Motherboard...
  • Page 130 1 4 9 1 4 9 1 4 9 1 4 9 1 4 9 ASRock M3A785GM-LE/128M Motherboard...
  • Page 131 1 5 0 1 5 0 1 5 0 1 5 0 1 5 0 ASRock M3A785GM-LE/128M Motherboard...
  • Page 132 1 5 1 1 5 1 1 5 1 1 5 1 1 5 1 ASRock M3A785GM-LE/128M Motherboard...
  • Page 133 “ ” “ ” “ ” “ ” 1 5 2 1 5 2 1 5 2 1 5 2 1 5 2 ASRock M3A785GM-LE/128M Motherboard...
  • Page 134 SATAII_4 SATAII_5 SATAII_6 (PORT 3) (PORT 4) (PORT 5) SATAII_1 SATAII_2 SATAII_3 (PORT 0) (PORT 1) (PORT 2) 1 5 3 1 5 3 1 5 3 1 5 3 1 5 3 ASRock M3A785GM-LE/128M Motherboard...
  • Page 135 1 5 4 1 5 4 1 5 4 1 5 4 1 5 4 ASRock M3A785GM-LE/128M Motherboard...
  • Page 136 ® ® ® ® “ ” “ ” “ ” “ ” ® “ ” “ ” 4 3 2 1 1 5 5 1 5 5 1 5 5 1 5 5 1 5 5 ASRock M3A785GM-LE/128M Motherboard...
  • Page 137 1 5 6 1 5 6 1 5 6 1 5 6 1 5 6 ASRock M3A785GM-LE/128M Motherboard...
  • Page 138 ® ® ® ® ® ® ® ® ® ® ® ® ® 1 5 7 1 5 7 1 5 7 1 5 7 1 5 7 ASRock M3A785GM-LE/128M Motherboard...
  • Page 139 ® ® ® ® ® ® “ ” 1 5 8 1 5 8 1 5 8 1 5 8 1 5 8 ASRock M3A785GM-LE/128M Motherboard...
  • Page 140 “ ” “ ” 1 5 9 1 5 9 1 5 9 1 5 9 1 5 9 ASRock M3A785GM-LE/128M Motherboard...
  • Page 141 1 6 0 1 6 0 1 6 0 1 6 0 1 6 0 ASRock M3A785GM-LE/128M Motherboard...
  • Page 142 ‘ ’ ® 1 6 1 1 6 1 1 6 1 1 6 1 1 6 1 ASRock M3A785GM-LE/128M Motherboard...
  • Page 143 1 6 2 1 6 2 1 6 2 1 6 2 1 6 2 ASRock M3A785GM-LE/128M Motherboard...
  • Page 144 ® ® ® “ ” ® ® ® ® 1 6 3 1 6 3 1 6 3 1 6 3 1 6 3 ASRock M3A785GM-LE/128M Motherboard...
  • Page 145 ® ® ® ® – 1 6 4 1 6 4 1 6 4 1 6 4 1 6 4 ASRock M3A785GM-LE/128M Motherboard...
  • Page 146 1 6 5 1 6 5 1 6 5 1 6 5 1 6 5 ASRock M3A785GM-LE/128M Motherboard...
  • Page 147 1 6 6 1 6 6 1 6 6 1 6 6 1 6 6 ASRock M3A785GM-LE/128M Motherboard...
  • Page 148 1 6 7 1 6 7 1 6 7 1 6 7 1 6 7 ASRock M3A785GM-LE/128M Motherboard...
  • Page 149 1 6 8 1 6 8 1 6 8 1 6 8 1 6 8 ASRock M3A785GM-LE/128M Motherboard...
  • Page 150 1 6 9 1 6 9 1 6 9 1 6 9 1 6 9 ASRock M3A785GM-LE/128M Motherboard...
  • Page 151 1 7 0 1 7 0 1 7 0 1 7 0 1 7 0 ASRock M3A785GM-LE/128M Motherboard...
  • Page 152 SATAII_4 SATAII_5 SATAII_6 (PORT 3) (PORT 4) (PORT 5) SATAII_1 SATAII_2 SATAII_3 (PORT 0) (PORT 1) (PORT 2) 1 7 1 1 7 1 1 7 1 1 7 1 1 7 1 ASRock M3A785GM-LE/128M Motherboard...
  • Page 153 1 7 2 1 7 2 1 7 2 1 7 2 1 7 2 ASRock M3A785GM-LE/128M Motherboard...
  • Page 154 ® ® ® ® ® 1 7 3 1 7 3 1 7 3 1 7 3 1 7 3 ASRock M3A785GM-LE/128M Motherboard...
  • Page 155 4 3 2 1 1 7 4 1 7 4 1 7 4 1 7 4 1 7 4 ASRock M3A785GM-LE/128M Motherboard...
  • Page 156 ® ® ® ® ® ® 1 7 5 1 7 5 1 7 5 1 7 5 1 7 5 ASRock M3A785GM-LE/128M Motherboard...
  • Page 157 ® ® ® ® ® ® ® ® ® ® 1 7 6 1 7 6 1 7 6 1 7 6 1 7 6 ASRock M3A785GM-LE/128M Motherboard...
  • Page 158 1 7 7 1 7 7 1 7 7 1 7 7 1 7 7 ASRock M3A785GM-LE/128M Motherboard...
  • Page 159 ® ® 1 7 8 1 7 8 1 7 8 1 7 8 1 7 8 ASRock M3A785GM-LE/128M Motherboard...
  • Page 160 1 7 9 1 7 9 1 7 9 1 7 9 1 7 9 ASRock M3A785GM-LE/128M Motherboard...
  • Page 161 ‘ ’ ® 1 8 0 1 8 0 1 8 0 1 8 0 1 8 0 ASRock M3A785GM-LE/128M Motherboard...
  • Page 162 1 8 1 1 8 1 1 8 1 1 8 1 1 8 1 ASRock M3A785GM-LE/128M Motherboard...
  • Page 163 ® ® ® ® ® ® ® 1 8 2 1 8 2 1 8 2 1 8 2 1 8 2 ASRock M3A785GM-LE/128M Motherboard...
  • Page 164 ® ® ® 1 8 3 1 8 3 1 8 3 1 8 3 1 8 3 ASRock M3A785GM-LE/128M Motherboard...
  • Page 165 1 8 4 1 8 4 1 8 4 1 8 4 1 8 4 ASRock M3A785GM-LE/128M Motherboard...
  • Page 166 1 8 5 1 8 5 1 8 5 1 8 5 1 8 5 ASRock M3A785GM-LE/128M Motherboard...
  • Page 167 1 8 6 1 8 6 1 8 6 1 8 6 1 8 6 ASRock M3A785GM-LE/128M Motherboard...
  • Page 168 1 8 7 1 8 7 1 8 7 1 8 7 1 8 7 ASRock M3A785GM-LE/128M Motherboard...
  • Page 169 1 8 8 1 8 8 1 8 8 1 8 8 1 8 8 ASRock M3A785GM-LE/128M Motherboard...
  • Page 170 SATAII_4 SATAII_5 SATAII_6 (PORT 3) (PORT 4) (PORT 5) SATAII_1 SATAII_2 SATAII_3 (PORT 0) (PORT 1) (PORT 2) 1 8 9 1 8 9 1 8 9 1 8 9 1 8 9 ASRock M3A785GM-LE/128M Motherboard...
  • Page 171 1 9 0 1 9 0 1 9 0 1 9 0 1 9 0 ASRock M3A785GM-LE/128M Motherboard...
  • Page 172 ® ® ® ® 4 3 2 1 1 9 1 1 9 1 1 9 1 1 9 1 1 9 1 ASRock M3A785GM-LE/128M Motherboard...
  • Page 173 ® ® ® ® ® 1 9 2 1 9 2 1 9 2 1 9 2 1 9 2 ASRock M3A785GM-LE/128M Motherboard...
  • Page 174 ® ® ® ® ® ® ® ® ® ® ® ® ® 1 9 3 1 9 3 1 9 3 1 9 3 1 9 3 ASRock M3A785GM-LE/128M Motherboard...
  • Page 175 ® ® ® ® ® ® ® ® ® 1 9 4 1 9 4 1 9 4 1 9 4 1 9 4 ASRock M3A785GM-LE/128M Motherboard...
  • Page 176 ® ® 1 9 5 1 9 5 1 9 5 1 9 5 1 9 5 ASRock M3A785GM-LE/128M Motherboard...
  • Page 177 1 9 6 1 9 6 1 9 6 1 9 6 1 9 6 ASRock M3A785GM-LE/128M Motherboard...
  • Page 178 1 9 7 1 9 7 1 9 7 1 9 7 1 9 7 ASRock M3A785GM-LE/128M Motherboard...
  • Page 179 ® 1 9 8 1 9 8 1 9 8 1 9 8 1 9 8 ASRock M3A785GM-LE/128M Motherboard...
  • Page 180 1 9 9 1 9 9 1 9 9 1 9 9 1 9 9 ASRock M3A785GM-LE/128M Motherboard...
  • Page 181 ® ® ® ® ® ® ® 2 0 0 2 0 0 2 0 0 2 0 0 2 0 0 ASRock M3A785GM-LE/128M Motherboard...
  • Page 182 ® ® ® 2 0 1 2 0 1 2 0 1 2 0 1 2 0 1 ASRock M3A785GM-LE/128M Motherboard...
  • Page 183 2 0 2 2 0 2 2 0 2 2 0 2 2 0 2 ASRock M3A785GM-LE/128M Motherboard...
  • Page 184 2 0 3 2 0 3 2 0 3 2 0 3 2 0 3 ASRock M3A785GM-LE/128M Motherboard...
  • Page 185 2 0 4 2 0 4 2 0 4 2 0 4 2 0 4 ASRock M3A785GM-LE/128M Motherboard...
  • Page 186 2 0 5 2 0 5 2 0 5 2 0 5 2 0 5 ASRock M3A785GM-LE/128M Motherboard...
  • Page 187 2 0 6 2 0 6 2 0 6 2 0 6 2 0 6 ASRock M3A785GM-LE/128M Motherboard...
  • Page 188 SATAII_4 SATAII_5 SATAII_6 (PORT 3) (PORT 4) (PORT 5) SATAII_1 SATAII_2 SATAII_3 (PORT 0) (PORT 1) (PORT 2) 2 0 7 2 0 7 2 0 7 2 0 7 2 0 7 ASRock M3A785GM-LE/128M Motherboard...
  • Page 189 ® 2 0 8 2 0 8 2 0 8 2 0 8 2 0 8 ASRock M3A785GM-LE/128M Motherboard...
  • Page 190 ® ® ® ® 4 3 2 1 2 0 9 2 0 9 2 0 9 2 0 9 2 0 9 ASRock M3A785GM-LE/128M Motherboard...
  • Page 191 ® ® ® ® ® 2 1 0 2 1 0 2 1 0 2 1 0 2 1 0 ASRock M3A785GM-LE/128M Motherboard...
  • Page 192 ® ® ® ® ® ® ® ® ® ® ® ® ® 2 1 1 2 1 1 2 1 1 2 1 1 2 1 1 ASRock M3A785GM-LE/128M Motherboard...
  • Page 193 ® ® ® ® ® ® ® ® ® 2 1 2 2 1 2 2 1 2 2 1 2 2 1 2 ASRock M3A785GM-LE/128M Motherboard...
  • Page 194 ® ® ® 2 1 3 2 1 3 2 1 3 2 1 3 2 1 3 ASRock M3A785GM-LE/128M Motherboard...

Table of Contents