Smart Screen - ASROCK M3A780GXH 128M - V1.0 User Manual

3 . 3

3 . 3 Smart Screen

3 . 3 Smart Screen Smart Screen Smart Screen
3 . 3 3 . 3 Smart Screen
In the Smart screen, you can load the BIOS setup according to your requirements.
Main Advanced
Smart
Smart Settings
Save Changes and Exit
Load BIOS Defaults
Load Performance Setup Default (IDE/SATA)
Load Performance Setup AHCI Mode
Load Performance Setup RAID Mode
Load Power Saving Setup Default
EZ Overclocking
Load Optimized CPU OC Setting [Press Enter]
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Save Changes and Exit
When you select this option, it will pop-out the following message, "Save
configuration changes and exit setup?" Select [OK] to save the changes and
exit the BIOS SETUP UTILITY.
Load BIOS Defaults
Load BIOS default values for all the setup questions. F9 key can be used for
this operation.
Load Performance Setup Default (IDE/SATA)
This performance setup default may not be compatible with all system
configurations. If system boot failure occurs after loading, please resume
optimal default settings. F5 key can be used for this operation.
Load Performance Setup AHCI Mode
This performance setup AHCI mode may not be compatible with all system
configurations. If system boot failure occurs after loading, please resume
optimal default settings. F3 key can be used for this operation.
Load Performance Setup RAID Mode
This performance setup RAID mode may not be compatible with all system
configurations. If system boot failure occurs after loading, please resume
optimal default settings. F4 key can be used for this operation.
Load Power Saving Setup Default
Load power saving setup default. F6 key can be used for this operation.
EZ Overclocking
Load Optimized CPU OC Setting
You can use this option to load the optiomized CPU overclocking setting.
The configuration options may be different according to the CPU you
adopt. Please note that overclocing may cause damage to your CPU and
motherboard. It should be done at your own risk and expense.
BIOS SETUP UTILITY
H/W Monitor Boot Security
Exit system setup
after saving the
changes.
F10 key can be used
for this operation.
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
5 6 5 6 5 6 5 6 5 6
Exit