Table of Contents
Advertisement
NOTE1. If you install Windows
manage (create, convert, delete, or rebuild) RAID functions on SATA / SATAII HDDs,
you still need to set up "SATA Operation Mode" to [RAID] in BIOS first. Then, please
set the RAID configuration by using the Windows RAID installation guide in the
following path in the Support CD:
.. \ RAID Installation Guide
NOTE2. Currently, if you install Windows
and there are no SATA / SATAII device used, please set up "SATA Operation Mode"
to [IDE] in BIOS.
2.13
2.13 Installing Windows
2.13
2.13
2.13
Installing Windows
Installing Windows
Installing Windows
Installing Windows
Vista
Vista
Vista
64-bit Without RAID Functions
64-bit Without RAID Functions
64-bit Without RAID Functions
Vista
Vista
TM
TM
64-bit Without RAID Functions
64-bit Without RAID Functions
TM
TM
TM
If you want to install Windows
Windows
®
Vista
TM
64-bit OS on your SATA / SATAII HDDs without RAID functions,
please follow below procedures according to the OS you install.
2.13.1 Installing Windows
2.13.1 Installing Windows
2.13.1 Installing Windows
2.13.1 Installing Windows
2.13.1 Installing Windows
Functions
Functions
Functions
Functions
Functions
If you want to install Windows
HDDs without RAID functions, please follow below steps.
NOTE1. If you install single or multiple SATA / SATAII HDDs on this motherboard and plan
to install Windows
use RAID mode even you don't plan to use RAID functions. Please follow the
steps of "Using SATA / SATAII HDDs with NCQ and Hot Plug functions" below.
NOTE2. AHCI mode is only recommended for Windows
you install Windows
Using SATA / SATAII HDDs with NCQ and Hot Plug functions
STEP 1: Set Up BIOS.
A.
Enter BIOS SETUP UTILITY
B.
Set the "SATA Operation Mode" option to [RAID].
STEP 2: Make a SATA / SATAII driver diskette.
Make a SATA / SATAII driver diskette by following section 2.12.1 step 2 on page
26.
STEP 3: Enter BIOS RAID utility (FastBuild Utility) to create JBOD on SATA /
SATAII HDD.
Restart your system. Press <Ctrl+F> to enter BIOS RAID utility (FastBuild Utility) to
create JBOD on SATA / SATAII HDD. For the proper operating procedures of
creating JBOD, please refer to the BIOS RAID installation guide part of the
document in the following path in the Support CD:
.. \ RAID Installation Guide
®
TM
®
TM
Vista
/ Windows
Vista
®
TM
Vista
/ Windows
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
® ® ® ® ®
®
®
XP, Windows
XP 64-bit, Windows
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
® ® ® ® ®
®
®
XP or Windows
XP 64-bit on your SATA / SATAII
®
XP / XP 64-bit on SATA / SATAII HDDs, it is still suggested to
®
®
XP / XP 64-bit, it is not suggested to use AHCI mode.
Advanced screen
2 8
2 8
2 8
2 8
2 8
64-bit on IDE HDDs and want to
®
TM
Vista
64-bit on IDE HDDs
/ / / / /
TM
TM
TM
TM
TM
®
TM
Vista
TM
TM
Vista
/ Vista
64-bit users. If
IDE Configuration.
or
Advertisement
Table of Contents
