Installing Windows ® 7 / 7 64-Bit / Vista; Tm Tm; With Raid Functions - ASROCK M3A UCC - V1.0 User Manual

STEP 4: Install Windows
After step 1, 2, 3, you can start to install Windows
At the beginning of Windows
When prompted, insert the SATA / SATAII driver diskette containing the ATI
driver. After reading the floppy disk, the driver will be presented. Select the driver to
install according to the OS you install. (Select "ATI AHCI Compatible RAID Controller-
x86 platform" for Windows
form" for Windows XP 64-bit.)
®
NOTE. If you install Windows
convert, delete, or rebuild) RAID functions on SATA / SATAII HDDs, you still need to
set up "SATA Operation Mode" to [RAID] first. Then, please set the RAID configuration
by using the Windows RAID installation guide in the following path in the Support CD:
.. \ RAID Installation Guide
2.12.2 Installing Windows 2.12.2 Installing Windows 2.12.2 Installing Windows
2.12.2 Installing Windows 2.12.2 Installing Windows
Vista Vista 64-bit With RAID Functions 64-bit With RAID Functions
Vista Vista Vista 64-bit With RAID Functions 64-bit With RAID Functions 64-bit With RAID Functions
TM TM TM TM TM
If you want to install Windows
composed of 2 or more SATA / SATAII HDDs with RAID functions, please follow
below steps.
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
Configuration.
B. Set the "SATA Operation Mode" option to [RAID].
STEP 2: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 3: Install Windows
system.
NOTE1. If you install Windows
to manage (create, convert, delete, or rebuild) RAID functions on SATA / SATAII
HDDs, you still need to set up "SATA Operation Mode" to [RAID] in BIOS first. Then,
please set the RAID configuration by using the Windows RAID installation guide in
the following path in the Support CD:
.. \ RAID Installation Guide
NOTE2. Currently, if you install Windows
IDE HDDs and there are no SATA / SATAII device used, please set up "SATA
Operation Mode" to [IDE] in BIOS.
® XP / XP 64-bit OS on your system.
XP / XP 64-bit OS on your system.
®
setup, press F6 to install a third-party RAID driver.
®
XP, or "ATI AHCI Compatible RAID Controller-x64 plat-
®
XP / XP 64-bit on IDE HDDs and want to manage (create,
®
7 / 7 64-bit / Vista 7 / 7 64-bit / Vista 7 / 7 64-bit / Vista
7 / 7 64-bit / Vista 7 / 7 64-bit / Vista
® ® ® ® ®
7 / 7 64-bit / Vista / Vista
® TM
Advanced screen
® 7 / 7 64-bit / Vista TM / Vista
7 / 7 64-bit / Vista / Vista
® TM
7 / 7 64-bit / Vista
®
2 7 2 7 2 7 2 7 2 7
RAID
TM
/ / / / /
TM TM TM TM TM
64-bit on a RAID disk
TM
Storage
TM 64-bit OS on your
64-bit on IDE HDDs and want
TM
/ Windows Vista 64-bit on
TM ® TM