Table of Contents
Advertisement
2.1 CPU Installation
Step 1.
Unlock the socket by lifting the lever up to a 90° angle.
Step 2.
Position the CPU directly above the socket such that its marked corner
matches the base of the socket lever.
Step 3.
Carefully insert the CPU into the socket until it fits in place.
The CPU fits only in one correct orientation. DO NOT force the
CPU into the socket to avoid bending of the pins.
Step 4.
When the CPU is in place, press it firmly on the socket while you push down
the socket lever to secure the CPU. The lever clicks on the side tab to
indicate that it is locked.
Step 1
2.2 Installation of CPU Fan and Heatsink
This motherboard adopts 462-pin CPU socket to support AMD Athlon XP /
Duron CPU. It requires larger heatsink and cooling fan to dissipate heat.
You also need to spray thermal grease between the CPU and the heatsink
to improve heat dissipation. Make sure that the CPU and the heatsink are
securely fastened and in good contact with each other. Then connect the
CPU fan to the CPU_FAN connector (CPU_FAN1, see p.8 No. 2). For
proper installation, please kindly refer to the instruction manuals of the
CPU fan and the heatsink.
Step 2, 3
Step 4
Advertisement
Table of Contents
