Onboard Headers And Connectors - ASROCK K10N78FULLHD-HSLI - R2.0 User Manual

Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA
HDD power connector
USB 2.0 Headers
(9-pin USB8_9)
(see p.13/14 No. 22)
(9-pin USB6_7)
(see p.13/14 No. 23)
WiFi/E Header
(15-pin WIFI/E)
(see p.13/14 No. 25)
If you don't plan to use WiFi+AP functin on this motherboard, this header can be
used as a 4-Pin USB 2.0 header to support one USB 2.0 port. To connect the
4-Pin USB device cable to this header, please refer to
this picture for proper installation.
DeskExpress Hot Plug Detection
Header
(5-pin IR1)
(see p.13/14 No. 17)
Internal Audio Connectors
(4-pin CD1)
(CD1: see p.13/14 No. 29)
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
connect to
power cable to the power
the power
connector of the power supply.
supply
Besides six default USB 2.0
USB_PWR
P-9
ports on the I/O panel, there are
P+9
GND
DUMMY
two USB 2.0 headers on this
1
motherboard. Each USB 2.0
GND
header can support two USB
P+8
P-8
USB_PWR
2.0 ports.
USB_PWR
P-7
P+7
GND
DUMMY
1
GND
P+6
P-6
USB_PWR
This header supports WiFi+AP
USB+5V_2
function with ASRock
TXN
TXP
GND2
WiFi-802.11g or WiFi-802.11n
PCIE_RST#
+3SVB
RXN RXP
module, an easy-to-use wireless
1
local area network (WLAN)
PexCLK
GND1
PexCLK#
D0- D0+
adapter. It allows you to create a
PME#
USB+5V_1
wireless environment and enjoy the
convenience of wireless network
connectivity.
This header supports the Hot
IRTX
+5VSB
Plug detection function for
Hotplug#
ASRock DeskExpress.
1
GND
IRRX
This connector allows you
to receive stereo audio input
CD1
from sound sources such as
a CD-ROM, DVD-ROM, TV
tuner card, or MPEG card.
3 1 3 1 3 1 3 1 3 1