Dual Monitors - ASROCK K10N78 Installation Manual

Step 8. Click the desktop. Then your system is switched to HybridPower
(Save Power).
C. Dual Monitors C. Dual Monitors
C. Dual Monitors C. Dual Monitors C. Dual Monitors
Step 1. Install one compatible PCI Express graphics card to PCIE1 slot (green). For
the proper installation procedures, please refer to section "Expansion Slots".
Step 2. Boot your system. Press <F2> to enter BIOS setup. Enter "Advanced"
screen, and enter "Chipset Settings". Then set the option "Share Memory"
to [32MB], [64MB], [128MB], [256MB] or [512MB].
Step 3. Connect one monitor cable to the correspondent connector on the I/O
shield. Connect the other monitor cable to the correspondent connector on
the PCI Express graphics card on PCIE1 slot.
Step 4. Boot into OS. Install Hybrid SLI
Hybrid SLI
TM
(There are two ASRock support CD in the motherboard gift box pack,
please choose the one for Windows
..\Drivers\Hybrid SLI driver\Vista
* Currently, Hybrid SLI
website for future update.
Step 5. Restart your computer. Then you will find the Hybrid icon on your Win-
dows taskbar. Please click the icon and select the item "Additional Displays".
®
Step 6. Click the desktop. Then your system is switched to Dual Monitors mode
(Additional Displays).
2 2 2 2 2 2
2 2 2 2
ASRock
TM driver from our support CD to your system.
driver is in the following path of ASRock support CD:
Vista
®
driver only has Vista
TM
K10N78-1394 / K10N78
TM
/ Vista 64-bit.)
TM TM
32 version, please visit our
TM
Motherboard
mode