Storage Configuration; Pcipnp Configuration - ASROCK ION 3D SERIES User Manual

6.4.4 SA 6.4.4 6.4.4 6.4.4 6.4.4 SA SA SA SAT T T T T A Configuration A Configuration A Configuration A Configuration A Configuration
Advanced

Storage Configuration

Configure SATA as
SATAII_1
SATAII_2
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Configure SATA as
Use this item to configure SATA mode. The default value of this option is
[IDE]. Configuration options: [IDE] and [AHCI].
AHCI (Advanced Host Controller Interface) supports NCQ and
other new features that will improve SATA disk performance
but IDE mode does not have these advantages.
6.4.5

6.4.5 PCIPnP Configuration

6.4.5 6.4.5 6.4.5 PCIPnP Configuration PCIPnP Configuration PCIPnP Configuration PCIPnP Configuration
Advanced
Advanced PCI / PnP Settings
PCI Latency Timer
PCI IDE BusMaster
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
PCI Latency Timer
The default value is 32. It is recommended to keep the default value unless
the installed PCI expansion cards' specifications require other settings.
PCI IDE BusMaster
Use this item to enable or disable the PCI IDE BusMaster feature.
4 2 4 2 4 2
4 2 4 2
BIOS SETUP UTILITY
Options
IDE
[IDE]
AHCI
[Not Detected]
[Not Detected]
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
BIOS SETUP UTILITY
Value in units of PCI
clocks for PCI device
latency timer
[32]
register.
[Enabled]
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit