Expansion Slots (Pci Express Slots) - ASROCK H67M-ITX User Manual

2.6 Expansion Slots (PCI Express Slots)

There are 1 PCI Express slot and 1 Mini-PCI Express slot (H67M-ITX/HT) on this
motherboard.
PCIE slots:
PCIE1 (PCIE x16 slot; Blue) is used for PCI Express x16 lane width
graphics cards.
MINI_PCIE1 (Mini-PCIE slot; White) is used for WiFi module.
Installing an expansion card
Step 1. Before installing the expansion card, please make sure that the power
supply is switched off or the power cord is unplugged. Please read the
documentation of the expansion card and make necessary hardware
settings for the card before you start the installation.
Step 2. Remove the system unit cover (if your motherboard is already installed
in a chassis).
Step 3. Remove the bracket facing the slot that you intend to use. Keep the
screws for later use.
Step 4. Align the card connector with the slot and press fi rmly until the card is
completely seated on the slot.
Step 5. Fasten the card to the chassis with screws.
Step 6. Replace the system cover.
24