Chipset Configuration - ASROCK G41M-S3 User Manual

3.4.2 Chipset Configuration

3.4.2 3.4.2 Chipset Configuration Chipset Configuration Chipset Configuration
3.4.2 3.4.2 Chipset Configuration
Advanced
Chipset Settings
DRAM RCOMP and tRD Configuration
DRAM DLL SKEW Configuration
Fixed Mode Operation
Intelligent Energy Saver
Primary Graphics Adapter
Shared Memory
PAVP Mode
DVMT Mode Select
DVMT/FIXED Memory
Onboard HD Audio
Front Panel
OnBoard Lan
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
DRAM RCOMP and tRD Configuration
Advanced
DRAM RCOMP STRENGTH Settings
DRAM CH0 RCOMP STRENGTH Info : 54-0-11-6-6-6-6
DRAM CH0 RCOMP ODT
DRAM CH0 G0 (Data)
DRAM CH0 G1 (Command)
DRAM CH0 G2 (Control1)
DRAM CH0 G3 (Control2)
DRAM CH0 G4 (Clocks1)
DRAM CH0 G5 (Clocks2)
DRAM CH1 RCOMP STRENGTH Info : 54-0-8-8-0-8-0
DRAM CH1 RCOMP ODT
DRAM CH1 G0 (Data)
DRAM CH1 G1 (Command)
DRAM CH1 G2 (Control1)
DRAM CH1 G3 (Control2)
DRAM CH1 G4 (Clocks1)
DRAM CH1 G5 (Clocks2)
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
DRAM CH0 RCOMP ODT
This controls the number of DRAM CH0 RCOMP ODT. Min: 1. Max: 63. The
default value is [Auto].
DRAM CH0 G0 (Data)
This controls the number of DRAM CH0 G0 (Data). Min: 1. Max: 15. The
default value is [Auto].
DRAM CH0 G1 (Command)
This controls the number of DRAM CH0 G1 (Command). Min: 1. Max: 15. The
default value is [Auto].
DRAM CH0 G2 (Control1)
This controls the number of DRAM CH0 G2 (Control1). Min: 1. Max: 15. The
default value is [Auto].
3 4 3 4 3 4
3 4 3 4
BIOS SETUP UTILITY
[Enabled]
[Disabled]
[PCI]
[Auto]
[Disabled]
[DVMT Mode]
[Maximum DVMT]
+ -
F1
[Auto]
F9
[Enabled]
F10
[Enabled]
ESC
BIOS SETUP UTILITY
DRAM CH0 RCOMP ODT
Value
[Auto]
Min = 1
[Auto]
Max = 63
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto] Select Screen Select Screen
[Auto] Select Item Select Item
[Auto]
+- +- Change Option Change Option
[Auto] F1 F1 General Help General Help
[Auto]
F9 F9 Load Defaults Load Defaults
[Auto] F10 F10 Save and Exit Save and Exit
[Auto] ESC ESC Exit Exit
Select Screen
Select Item
Change Option
General Help
Load Defaults
Save and Exit
Exit