Oc Tweaker Screen - ASROCK G41M-S3 User Manual

3.3 OC T 3.3 3.3 3.3 3.3 OC T OC T OC T OC Tweak weak weak weaker Screen weak er Screen er Screen er Screen er Screen
In the OC Tweaker screen, you can set up overclocking features.
Main OC Tweaker
OC Tweaker Settings
Load Optimized CPU OC Setting
DRAM Frequency
DRAM Command Rate
DRAM Timing Configuration
Ratio Status
Ratio CMOS Setting
Intel (R) SpeedStep (tm) tech.
Overclock Mode
CPU Frequency (MHz)
PCIE Frequency (MHz)
Vcore
CPU Voltage
DRAM Voltage
NB Voltage
SB Voltage
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Load Optimized CPU OC Setting
You can use this option to load the optiomized CPU overclocking setting.
Configuration options: [Press Enter], [CPU 2.64 GHz], [CPU 2.88 GHz], [CPU
3.00 GHz], [CPU 3.12 GHz] and [CPU 3.27 GHz]. Please note that overclocing
may cause damage to your CPU and motherboard. It should be done at
your own risk and expense.
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically. You may select
[400MHz DDR3_800], [533MHz DDR3_1066] or [667MHz DDR3_1333]. The
configuration options depend on the CPU and memory module you adopt on
this motherboard. Please refer to page 8 for the CPU FSB frequency and its
corresponding memory support frequency.
DRAM Command Rate
Use this item to adjust DRAM Command Rate. Configurationoptions: [1N],
[2N] and [Auto].
2 8 2 8 2 8
2 8 2 8
BIOS SETUP UTILITY
Advanced H/W Monitor Boot
Overclocking may cause
damage to your CPU and
[Press Enter]
motherboard.
It should be done at
[Auto]
your own risk and
[Auto]
expense.
Unlocked (Min:06, Max:17)
[17]
17
[Disabled]
[Auto]
[200]
[100]
Enter Go to Sub Screen
: 1.366 V
F1
[Auto]
F9
1.53V [Auto]
F10
1.251V [Auto]
ESC
1.527V [Auto]
Security Exit
Select Screen
Select Item
General Help
Load Defaults
Save and Exit
Exit