Table of Contents
Advertisement
DRAM Burst Length
DRAM Burst length can be set as [8] or [4].
Init. Graphic Adapter Priority
This allows you to select [PCI/AGP] and [AGP/PCI] as the initial graphics
adapter priority. The default vaule is [PCI/AGP].
Graphics Aperture Size
It refers to a section of the PCI memory address range used for graphics
memory. It is recommended to leave this field at the default value unless the
installed AGP card's specifications requires other sizes.
OnBoard LAN
This allows you to enable or disable the "OnBoard LAN" feature.
OnBoard AC'97 Audio
Select [Auto], [Enabled] or [Disabled] for the onboard AC'97 Audio feature.
3.3.3
3.3.3
ACPI Configuration
ACPI Configuration
3.3.3 ACPI Configuration
3.3.3
3.3.3
ACPI Configuration
ACPI Configuration
Advanced
ACPI Configuration
Suspend To RAM
Restore on AC / Power Loss
Ring-In Power On
PCI Devices Power On
PS / 2 Keyboard Power On
RTC Alarm Power On
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Restore on AC/Power Loss
Use this item to set the power state after an unexpected AC/power loss. If
[Power Off] is selected, the AC/power remains off when the power
recovers. If [Power On] is selected, the AC/power resumes and the sys-
tem starts to boot up when the power recovers.
Ring-In Power On
Use this item to enable or disable Ring-In signals to turn on the system from
the power-soft-off mode.
PCI Devices Power On
Use this item to enable or disable PCI devices to turn on the system from the
power-soft-off mode.
PS/2 Keyboard Power On
Use this item to enable or disable PS/2 keyboard to turn on the system from
the power-soft-off mode.
2 8
2 8
2 8
2 8
2 8
BIOS SETUP UTILITY
Select auto-detect or
disable the STR
feature.
[Disabled]
[Power Off]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Select Screen
Select Item
+-
Change Option
F1
General Help
F9
Load Defaults
F10
Save and Exit
ESC
Exit
Advertisement
Table of Contents
