Hot Plug And Hot Swap Functions For Sata / Sataii Hdds - ASROCK AOD790GX 128M - V1.1 User Manual

2.14 Hot Plug and Hot Swap Functions for SA 2.14 Hot Plug and Hot Swap F 2.14 Hot Plug and Hot Swap F
2.14 Hot Plug and Hot Swap F 2.14 Hot Plug and Hot Swap F
HDDs HDDs HDDs HDDs HDDs
This motherboard supports Hot Plug and Hot Swap functions for SATA / SATAII
Devices in RAID / AHCI mode. AMD SB750 south bridge chipset provides hardware
support for Advanced Host controller Interface (AHCI), a new programming interface
for SATA host controllers developed thru a joint industry effort. AHCI also provides
usability enhancements such as Hot Plug.
NOTE
What is Hot Plug Function?
If the SATA / SATAII HDDs are NOT set for RAID configuration, it is
called "Hot Plug" for the action to insert and remove the SATA / SATAII
HDDs while the system is still power-on and in working condition.
However, please note that it cannot perform Hot Plug if the OS has
been installed into the SATA / SATAII HDD.
What is Hot Swap Function?
If SATA / SATAII HDDs are built as RAID 1 or RAID 5 then it is called
"Hot Swap" for the action to insert and remove the SATA / SATAII
HDDs while the system is still power-on and in working condition.
eSATAII is equipped with Hot Plug capability that enables you to
exchange drives easily. For example, with eSATAII interface, you may
simply plug your eSATAII devices to the eSATAII ports instead of
opening your chassis to exchange your SATAII hard disk.
unctions for SA unctions for SAT T T T T A / SA unctions for SA A / SA A / SAT T T T T AII A / SA
unctions for SA A / SA
4 6 4 6 4 6 4 6 4 6
AII AII AII
AII