Installation - ASROCK AOD790GX 128M - V1.1 User Manual

2.13 2.13 Serial A 2.13 Serial AT T T T T A (SA Serial A Serial A A (SA A (SAT T T T T A) / Serial A A (SA
2.13 2.13 Serial A A (SA

Installation

Installation Installation Installation Installation
This motherboard adopts AMD SB750 south bridge chipset that supports Serial
ATA (SATA) / Serial ATAII (SATAII) hard disks and RAID (RAID 0, RAID 1, RAID 5,
RAID 10 and JBOD) functions. You may install SATA / SATAII hard disks on this
motherboard for internal storage devices. This section will guide you to install the
SATA / SATAII hard disks.
STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard's SATAII
connector.
STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard
disk.
1. If you plan to use RAID 0 or RAID 1 function, you need to install at least 2
SATA / SATAII hard disks. If you plan to use RAID 5 function, you need to
install at least 3 SATA / SATAII hard disks. If you plan to use RAID 0+1 or
RAID 10 function, you need to install 4 SATA / SATAII hard disks.
2. It is recommended to build RAID on internal SATAII ports. In other words, if
SATAII_6 is used for eSATAII port, please build RAID on other SATAII ports.
A) / Serial A A) / Serial AT T T T T AII (SA A) / Serial A AII (SAT T T T T AII) Hard Disks AII (SA AII (SA
A) / Serial A AII (SA
4 5 4 5 4 5 4 5 4 5
AII) Hard Disks AII) Hard Disks AII) Hard Disks
AII) Hard Disks