ASROCK 945GCM-S Installation Manual page 7

CAUTION!
1. FSB1333-CPU will operate in overclocking mode. Under this situation,
PCIE frequency will also be overclocked to 115MHz. Besides, if you want
to overclock the CPU you adopt from FSB800 to FSB1066, you need to
adjust the jumpers. Please refer to page 14 for proper jumper settings.
2. About the setting of "Hyper Threading Technology", please check page 30
of "User Manual" in the support CD.
3. This motherboard supports Untied Overclocking Technology. Please read
"Untied Overclocking Technology" on page 19 for details.
4. This motherboard supports Dual Channel Memory Technology. Before you
implement Dual Channel Memory Technology, make sure to read the
installation guide of memory modules on page 12 for proper installation.
5. Please check the table below for the CPU FSB frequency and its corre-
sponding memory support frequency.
CPU FSB Frequency
1333
1066
800
533
* When you use a FSB1333-CPU on this motherboard, it will run at
DDR2 500 if you adopt a DDR2 533 memory module.
6. Due to the chipset limitation, the actual memory size may be less than
4GB for the reservation for system usage under Windows
®
XP 64-bit, Windows Vista
7. The maximum shared memory size is defined by the chipset vendor and
is subject to change. Please check Intel
8. Before installing SATAII hard disk to SATAII connector, please read the "SATAII
Hard Disk Setup Guide" on page 23 of "User Manual" in the support CD to
adjust your SATAII hard disk drive to SATAII mode. You can also connect SATA
hard disk to SATAII connector directly.
9. Power Management for USB 2.0 works fine under Microsoft
Vista TM 64-bit / Vista TM / XP 64-bit / XP SP1 or SP2 / 2000 SP4.
10. Featuring an advanced proprietary hardware and software design,
Intelligent Energy Saver is a revolutionary technology that delivers
unparalleled power savings. In other words, it is able to provide exceptional
power saving and improve power efficiency without sacrificing computing
performance. Please visit our website for the operation procedures of
Intelligent Energy Saver.
ASRock website: http://www.asrock.com
11. Although this motherboard offers stepless control, it is not recommended
to perform over-clocking. Frequencies other than the recommended CPU
bus frequencies may cause the instability of the system or damage the
CPU.
ASRock 945GCM-S Motherboard
Memory Support Frequency
DDR2 533*, DDR2 667
DDR2 533, DDR2 667
DDR2 400, DDR2 533, DDR2 667
DDR2 400, DDR2 533
TM ® TM
and Windows Vista 64-bit.
®
website for the latest information.
® ®
XP, Windows
® Windows ®
7 7 7 7 7