Functions - ASROCK 939N68PV-GLAN Installation Manual

1.3.2 Installing Windows
RAID Functions
If you want to install Windows
HDDs with RAID functions, please follow below steps.
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [RAID].
STEP 2: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 3: Install Windows
®
Insert the Windows Vista
drive to boot your system, and follow the instruction to install Windows
® TM
Windows Vista 64-bit OS on your system. When you see "Where do you want to
install Windows?" page, please insert the ASRock Support CD into your optical drive,
and click the "Load Driver" button on the left on the bottom to load the NVIDIA
drivers. NVIDIA ® RAID drivers are in the following path in our Support CD:
(There are two ASRock Support CD in the motherboard gift box pack, please
choose the one for Windows
.. \ I386 \ RAID_Vista (For Windows
.. \ AMD64\ RAID_Vista64 (For Windows
After that, please insert Windows
the optical drive again to continue the installation.
NOTE. If you install Windows
manage (create, convert, delete, or rebuild) RAID functions on SATA / SATAII HDDs,
you still need to set up "SATA Operation Mode" to [RAID] in BIOS first. Then, please set
the RAID configuration by using the Windows RAID installation guide in the following
path in the Support CD:
.. \ RAID Installation Guide
® Vista TM / Vista TM
® Vista TM / Windows ® Vista
Advanced screen
® Vista TM / Vista TM 64-bit OS on your system.
TM ® TM
/ Windows Vista 64-bit optical disk into the optical
® TM TM
Vista / Vista 64-bit.)
® Vista TM OS)
® Vista TM 64-bit OS)
® Vista TM / Windows ®
® TM ® TM
Vista / Windows Vista
7 7 7 7 7
64-bit With
TM 64-bit on your SATA / SATAII
IDE Configuration.
®
Vista
® RAID
Vista TM 64-bit optical disk into
64-bit on IDE HDDs and want to
TM
/