ASROCK 775XFIRE-ESATA2 - INSTALLATION GUIDE 02-2006 Installation Manual page 18

Step 9. Install the VGA card drivers to your system, and restart your computer.
Then you will find "ATI Catalyst Control Center" on your desktop (ATI
Catalyst driver should be version 5.10 or higher).
Step 10. Double-click "ATI Catalyst Control Center". Click "View", and select "Ad-
vanced View". Click "CrossFire
TM
CrossFire
View
TM
CrossFire
If you install one Radeon CrossFire
standard Radeon (CrossFire
not two Radeon CrossFire
above steps. However, although you have selected the option "Enable
CrossFire
will automatically reboot. After restarting your computer, please confirm whether
the option "Enable CrossFire
not; if not, please select it again, and then you are able to enjoy the benefit of
CrossFire
Step 11. You can freely enjoy the benefit of CrossFire
TM
* CrossFire appearing here is a registered trademark of ATI Technologies Inc., and is used only
for identification or explanation and to the owners' benefit, without intent to infringe.
1 8 1 8 1 8
1 8 1 8
ASRock 775XFire-eSATA2 Motherboard
TM
", and then set the option "Enable
" to "Yes".
TM
TM
Ready) graphics card to this motherboard but
TM
Edition graphics cards, please as well follow the
TM TM
", the CrossFire function can not work actually. Your computer
TM
" in "ATI Catalyst Control Center" is selected or
TM
feature.
You will find "ATI Catalyst
Control Center" on your
desktop.
Enable CrossFire
Edition graphics card and one compatible
TM feature.
TM