ASROCK 775I65PE-M User Manual page 14

Serial ATA (SATA)
Power Cable
connect to the SATA
(Optional)
HDD power connector
USB 2.0 Header
(9-pin USB67)
(see p.2 No. 12)
Shared USB 2.0 Header
(9-pin USB4_5)
(see p.2 No. 27)
Infrared Module Header
(5-pin IR1)
(see p.2 No. 17)
nternal Audio Connectors
(4-pin CD1, 4-pin AUX1)
(CD1: see p.2 No. 21)
(AUX1: see p.2 No. 20)
Front Panel Audio Header
(9-pin AUDIO1)
(see p.2 No. 23)
1 4 1 4 1 4
1 4 1 4
connect to the
power supply
AUX1 CD1
ASRock 775i65PE-M Motherboard
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
power cable to the power
connector of the power supply.
TM
ASRock I/O Plus accommo-
dates 6 default USB 2.0 ports. If
those USB 2.0 ports on the I/O
panel are not sufficient, this
USB 2.0 header is available to
support 2 additional USB 2.0
ports.
This USB45 connector is shared
with the USB 2.0 ports 4,5 on
TM
ASRock I/O Plus . When using
the front panel USB ports by
attaching the front panel USB
cable to this connector
(USB4_5), the USB ports 4,5 on
TM
ASRock I/O Plus will not be able
to function.
This header supports an
optional wireless transmitting
and receiving infrared module.
These connectors allow you
to receive stereo audio input
from sound sources such as
a CD-ROM, DVD-ROM, TV
tuner card, or MPEG card.
This is an interface for front
panel audio cable that allows
convenient connection and
control of audio devices.