Ide Configuration - ASROCK 775DUAL-915GL User Manual

PS/2 Keyboard Power On
Use this item to enable or disable PS/2 keyboard to turn on the system from
the power-soft-off mode.
RTC Alarm Power On
Use this item to enable or disable RTC (Real Time Clock) to power on the
system.

3.3.4 IDE Configuration

3.3.4 3.3.4 3.3.4 3.3.4 IDE Configuration IDE Configuration IDE Configuration IDE Configuration
BIOS SETUP UTILITY
Advanced
IDE Configuration
ATA/IDE Configuration
SATA1
SATA2
SATA3
SATA4
IDE1 Master
IDE1 Slave
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
ATA/IDE Configuration
Please select [Compatible] when you install legacy OS (Windows NT). If
native OS (Windows 2000 / XP) is installed, please select [Enhanced].
When [Compatible] is selected
Combined Option
It allows you to select between [SATA 1, SATA 2, SATA 3, SATA 4], [SATA
1, SATA 3, IDE 1], and [IDE 1, SATA 2, SATA 4]. If it is set to [SATA 1, SATA
3, IDE 1], then SATA2, SATA4 will not work. Likewise, if it is set to [IDE 1,
SATA 2, SATA 4], then SATA1, SATA3 will not work.
Because Intel
under legacy OS (Windows NT), you have to choose [SATA 1, SATA 2,
SATA 3, SATA 4], [SATA 1, SATA 3, IDE 1], or [IDE 1, SATA 2, SATA 4]
when the installed device is used with legacy OS.
[SATA 1, SATA 2,
SATA 3, SATA 4]
Master SATA1, SATA2,
Slave SATA3, SATA4,
Set [Compatible]
when Legacy OS
(MS-DOS, Win NT)
[Enhanced]
device is used.
Set [Enhanced]
[Hard Disk]
when Native OS
[Not Detected]
(Win2000 / XP)
[Not Detected]
is used.
[Not Detected]
[ATAPI CDROM]
[Not Detected]
Select Screen
Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
®
ICH6 south bridge only supports four IDE devices
[SATA 1, SATA 3,
IDE 1]
SATA1
SATA3
3 0 3 0 3 0
3 0 3 0
[IDE 1, SATA 2,
SATA 4]
SATA2
SATA4