ASROCK 770 EXTREME3 User Manual page 39

Bank Interleaving
Interleaving allows memory accesses to be spread out over banks on the
same node, or accross nodes, decreasing access contention.
Channel Interleaving
It allows you to enable Channel Memory Interleaving. Configuration options:
[Disabled], [Address bits 6], [Address bits 12], [Address bits 6], [HASH 1]
and [HASH 2]. The default value is [HASH 2].
CAS Latency (CL)
Use this item to adjust the means of memory accessing. Configuration
options: [Auto], [4CLK] to [12CLK]. The default value is [Auto].
TRCD
Use this to adjust TRCD values. Configuration options: [Auto], [5CLK] to
[12CLK]. The default value is [Auto].
TRP
Use this to adjust TRP values. Configuration options: [Auto], [5CLK] to
[12CLK]. The default value is [Auto].
TRAS
Use this to adjust TRAS values. Configuration options: [Auto], [15CLK] to
[30CLK]. The default value is [Auto].
TRTP
Use this to adjust TRTP values. Configuration options: [Auto], [4CLK] to
[7CLK]. The default value is [Auto].
TRRD
Use this to adjust TRRD values. Configuration options: [Auto], [4CLK] to
[7CLK]. The default value is [Auto].
TWTR
Use this to adjust TWTR values. Configuration options: [Auto], [4CLK] to
[7CLK]. The default value is [Auto].
TWR
Use this to adjust TWR values. Configuration options: [Auto], [5CLK] to
[12CLK]. The default value is [Auto].
TRC
Use this to adjust TRC values. Configuration options: [Auto], [11CLK] to
[42CLK]. The default value is [Auto].
TRWTWB
Use this to adjust TRWTWB values. Configuration options: [Auto], [3CLK] to
[18CLK]. The default value is [Auto].
TRWTTO
Use this to adjust TRWTTD values. Configuration options: [Auto], [3CLK] to
[17CLK]. The default value is [Auto].
3 9 3 9 3 9 3 9 3 9