Oc Tweaker Screen - ASROCK 770 EXTREME3 User Manual

3.3 OC T 3.3 3.3 OC Tweak OC T OC T weaker Screen weak weak er Screen er Screen er Screen
3.3 3.3 OC T weak er Screen
In the OC Tweaker screen, you can set up overclocking features.
Main OC Tweaker Advanced
EZ Overclocking
Load Optimized CPU OC Setting
CPU Configuration
Overclock Mode
CPU Frequency (MHZ)
CPU DOC Frequency (MHZ)
PCIE Frequency (MHz)
Spread Spectrum
Boot Failure Guard
Boot Failure Guard Count
Advanced Clock Calibration
CPU Active Core Control
Processor Maximum Frequency
North Bridge Maximum Frequency
Processor Maximum Voltage
Multiplier/Voltage Change
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
EZ Overclocking
Load Optimized CPU OC Setting
You can use this option to load the optiomized CPU overclocking setting.
Configuration options: [Press Enter], [Default], [5% (2310MHz)] to [50%
(3300MHz)]. Please note that overclocking may cause damage to your
CPU and motherboard. It should be done at your own risk and expense.
CPU Configuration
Overclock Mode
Use this to select Overclock Mode. The default value is [Auto]. Configura-
tion options: [Auto], [CPU, PCIE, Sync.], [CPU, PCIE, Async.] and [Optimized].
CPU Frequency (MHz)
Use this option to adjust CPU frequency.
CPU DOC Frequency (MHz)
Use this option to adjust CPU DOC frequency.
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency.
Spread Spectrum
This item should always be [Auto] for better system stability.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Boot Failure Guard Count
Enable or disable the feature of Boot Failure Guard Count.
BIOS SETUP UTILITY
H/W Monitor Boot Security
Overclocking may cause
[Press Enter]
damage to your CPU and
motherboard.
It should be done at
your own risk and
[Auto]
expense.
[200]
[Auto]
[100]
[Auto]
[Enabled]
Select Screen
[3]
Select Item
[Disabled]
Enter Go to Sub Screen
[All Cores]
F1 General Help
x10.5 2100 MHZ
F9 Load Defaults
x9.0 18 00 MHz
F10 Save and Exit
1.2500 V
ESC Exit
[Auto]
3 6 3 6 3 6 3 6 3 6
Exit