Table of Contents
Advertisement
2.2 NVIDIA Windows RAID Installation Guide for Windows Vista / Vista 64-bit Users
After GUI software is installed, it will automatically start every time when your Windows OS is started. An icon
tray of the tool bar to indicate that GUI software is currently running.
Just double click on the small icon to call out the main interface of the software.
2.2.1
Create Disk Array
To create a RAID disk array, you can click on "Create Array"
disks is enough for a RAID mode, you can finish your creation. When free disks (disks not in any disk array) are selected to create
a disk array, original data on these disks maybe lost, so be sure these data will never be needed or conduct necessary back-ups.
You are allowed to select RAID 1 (Mirror), RAID 0 (Stripe), Span (JBOD), RAID 5 or RAID 0+1. Here we take RAID 1 (Mirror) for
example. For other types of RAID disk array, the operation procedures are similar. Please refer to below steps for details of
creating a RAID disk array.
A.
Select RAID Mode
in the Operation block. If the number of available free
18
will appear in the system
Advertisement
Table of Contents
