Driver Installation Guide - ASROCK 4COREDUAL-SATA2 - INSTALLATION GUIDE 09-2007 Installation Manual

2.12

2.12 Driver Installation Guide

2.12 Driver Installation Guide Driver Installation Guide Driver Installation Guide
2.12 2.12 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom
side to install those required drivers. Therefore, the drivers you install can work
properly.
2.13 2.13 Installing Windows Installing Windows
2.13 2.13 Installing Windows 2.13 Installing Windows Installing Windows
/ Vista / Vista / Vista / Vista / Vista 64-bit With RAID Functions 64-bit With RAID Functions 64-bit With RAID Functions 64-bit With RAID Functions 64-bit With RAID Functions
TM TM
TM TM TM
If you want to install Windows
Vista TM or Windows ® Vista
functions, please follow below procedures according to the OS you install.
The current version of RAID driver does not support Hot Swap function under RAID 1.
If you create RAID 1 on your SATA / SATAII HDDs, please do not insert or remove your
SATA / SATAII HDDs while the system is power on and in working condition. As soon
as the RAID driver with Hot Swap function under RAID 1 is ready, we will upload it to
our website. Please visit our website for RAID driver update in the near future.
ASRock website: http://www.asrock.com
2.13.1 Installing Windows 2.13.1 Installing Windows 2.13.1 Installing Windows 2.13.1 Installing Windows 2.13.1 Installing Windows
RAID Functions RAID Functions
RAID Functions RAID Functions RAID Functions
If you want to install Windows
SATA / SATAII HDDs with RAID functions, please follow below steps.
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [RAID].
STEP 2: Make a SATA / SATAII Driver Diskette.
A. Insert the ASRock Support CD into your optical drive to boot your system.
B. During POST at the beginning of system boot-up, press <F11> key, and then a
window for boot devices selection appears. Please select CD-ROM as the boot
device.
C. When you see the message on the screen, "Generate Serial ATA driver diskette
[YN]?", press <Y>.
D. Then you will see these messages,
Please insert a blank
formatted diskette into floppy
drive A:
press any key to start
Please insert a floppy diskette into the floppy drive, and press any key.
ASRock 4CoreDual-SATA2 Motherboard
2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista
2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista
®
® 2000, Windows ® XP, Windows
TM 64-bit OS on your SATA / SATAII HDDs with RAID
2000 / XP / XP 64-bit With 2000 / XP / XP 64-bit With 2000 / XP / XP 64-bit With 2000 / XP / XP 64-bit With 2000 / XP / XP 64-bit With
®
® ®
2000, Windows XP or Windows
Advanced screen
TM TM TM TM TM
® XP 64-bit, Windows ®
®
XP 64-bit on your
IDE Configuration.
2 5 2 5 2 5 2 5 2 5