Installation Of Memory Modules (Dimm) - ASROCK 4COREDUAL-SATA2 - INSTALLATION GUIDE 09-2007 Installation Manual

2.3 Installation of Memory Modules (DIMM)

2.3 Installation of Memory Modules (DIMM) 2.3 Installation of Memory Modules (DIMM) 2.3 Installation of Memory Modules (DIMM) 2.3 Installation of Memory Modules (DIMM)
4CoreDual-SATA2 motherboard provides two 184-pin DDR (Double Data Rate)
DIMM slots and two 240-pin DDRII DIMM slots, and supports Dual Channel Memory
Technology. For dual channel configuration, you always need to install identi-
cal (the same brand, speed, size and chip-type) DDR / DDRII DIMM pair in the
slots of the same color. In other words, you have to install identical DDRII DIMM
pair in Dual Channel A (DDRII_1 and DDRII_2; Yellow slots; see p.2 No.6) or
identical DDR DIMM pair in Dual Channel B (DDR1 and DDR2; Blue slots; see p.
2 No.7), so that Dual Channel Memory Technology can be activated. You may
refer to the Dual Channel Memory Configuration Table below.
Dual Channel Memory Configurations
DDRII_1
(Yellow Slot) (Blue Slot)
(1) Populated
(2) -
1. It is not allowed to install a DDR memory module into DDRII slot or
a DDRII memory module into DDR slot; otherwise, this motherboard
and DIMM may be damaged.
2. It is not allowed to install both DDR and DDRII memory modules to
this motherboard at the same time; otherwise, this motherboard and
DIMM may be damaged.
ASRock 4CoreDual-SATA2 Motherboard
DDR1 DDRII_2
(Yellow Slot) (Blue Slot)
- Populated
Populated -
DDR2
-
Populated
1 3 1 3 1 3 1 3 1 3