Floppy Configuration; Super Io Configuration - ASROCK 4CORE1600TWINS-P35D - V1.0 User Manual

Table of Contents

Advertisement

3.3.6

3.3.6 Floppy Configuration

3.3.6
Floppy Configuration
Floppy Configuration
Floppy Configuration
3.3.6
3.3.6
Floppy Configuration
In this section, you may configure the type of your floppy drive.
BIOS SETUP UTILITY
Advanced
Floppy Configuration
[1.44 MB 3 "]
Floppy A
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
3.3.7

3.3.7 Super IO Configuration

3.3.7
3.3.7
3.3.7
Super IO Configuration
Super IO Configuration
Super IO Configuration
Super IO Configuration
BIOS SETUP UTILITY
Advanced
Configure Super IO Chipset
OnBoard Floppy Controller
[Enabled]
Serial Port Address
[3F8 / IRQ4]
Infrared Port Address
[Disabled]
Parallel Port Address
[378]
Parallel Port Mode
[ECP + EPP]
EPP Version
[1.9]
ECP Mode DMA Channel
[DMA3]
Parallel Port IRQ
[IRQ7]
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
OnBoard Floppy Controller
Use this item to enable or disable floppy drive controller.
Serial Port Address
Use this item to set the address for the onboard serial port or disable it.
Configuration options: [Disabled], [3F8 / IRQ4], [2F8 / IRQ3], [3E8 / IRQ4],
[2E8 / IRQ3].
Infrared Port Address
Use this item to set the address for the onboard infrared port or disable it.
Configuration options: [Disabled], [2F8 / IRQ3], and [2E8 / IRQ3]. If you plan to
use ASRock DeskExpress on this motherboard, please keep this item on
[Disabled] option.
Select the type of
floppy drive
connected to the
1
2
system.
Select Screen
Select Item
+-
Change Option
F1
General Help
F9
Load Defaults
F10
Save and Exit
ESC
Exit
Allow BIOS to Enable
or Disable Floppy
Controller.
Select Screen
Select Item
+-
Change Option
F1
General Help
F9
Load Defaults
F10
Save and Exit
ESC
Exit
5 4
5 4
5 4
5 4
5 4

Advertisement

Table of Contents
loading

This manual is also suitable for:

4core1600twins-p35d

Table of Contents