Table of Contents
Advertisement
F. Enter Windows system. Click the icon on the lower right hand
taskbar to enter Realtek HD Audio Manager.
For Windows
Click "Audio I/O", select "Connector Settings"
"Disable front panel jack detection", and save the change by
clicking "OK".
For Windows
Click the right-top "Folder" icon
panel jack detection", and save the change by clicking "OK".
System Panel Header
(9-pin PANEL1)
(see p.11 No. 15)
Chassis Speaker Header
(4-pin SPEAKER 1)
(see p.11 No. 14)
Chassis Fan Connector
(3-pin CHA_FAN1)
(see p.11 No. 13)
CPU Fan Connector
FAN_SPEED_CONTROL
(4-pin CPU_FAN1)
(see p.11 No. 3)
Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin
CPU fan still can work successfully even without the fan speed control function.
If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this
motherboard, please connect it to Pin 1-3.
ATX Power Connector
(24-pin ATXPWR1)
(see p.11, No. 35)
2000 / XP / XP 64-bit OS:
®
Vista
/ Vista
64-bit OS:
®
TM
TM
PLED+
This header accommodates
PLED-
PWRBTN#
several system front panel
GND
functions.
1
DUMMY
RESET#
GND
HDLED-
HDLED+
Please connect the chassis
1
speaker to this header.
SPEAKER
DUMMY
DUMMY
+5V
Please connect a chassis fan
cable to this connector and
GND
+12V
CHA_FAN_SPEED
match the black wire to the
ground pin.
Please connect a CPU fan cable
4
to this connector and match
CPU_FAN_SPEED
3
+12V
2
the black wire to the ground pin.
GND
1
Pin 1-3 Connected
Please connect an ATX power
12
24
supply to this connector.
1
13
3 0
3 0
3 0
3 0
3 0
, choose
, choose "Disable front
3-Pin Fan Installation
Advertisement
Table of Contents
