Boot Screen - ASROCK 4CORE1333-GLAN - V1.1 User Manual

CPU Quiet Fan
This item allows you to identify the temperature of CPU fan. If you set this
option as [Disabled], the CPU fan will operate in full speed. If you set this
option as [Enabled], you will find the items "Target CPU Temperature
( C)", "Tolerance ( C)", and "Minimun Fan Speed" appear to allow you
adjusting them. The default value is [Disabled]. You are allowed to enable
this function only when you install 4-pin CPU fan.
Target CPU Temperature ( C)
The target temperature will be between 45 C and 65 C. The default
value is [50].
Tolerance ( C)
The default value of tolerance is [2], which means the error of the
target CPU temperature will be within 2 C.
Target Fan Speed
Use this option to set the target fan speed. You can freely adjust the
target fan speed according to the target CPU temperature that you
choose. The default value is [Fast]. Configuration options: [Fast], [Middle]
and [Slow].
3.5 3.5

Boot Screen

Boot Screen
3.5 3.5 Boot Screen 3.5 Boot Screen Boot Screen
In this section, it will display the available devices on your system for you to config-
ure the boot settings and the boot priority.
Main Advanced
Boot Settings
Boot Settings Configuration
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
Hard Disk Drives
Removable Drives
CD/DVD Drives
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
BIOS SETUP UTILITY
H/W Monitor Boot
Security
Configure Settings
during System Boot.
[1st Floppy Device]
[HDD: PM - HDS722580VL]
[CD / DVD: 3S - CD - ROM C]
[USB]
Enter Go to Sub Screen
F1
F9
F10
ESC
4 0 4 0 4 0
4 0 4 0
Exit
Select Screen
Select Item
General Help
Load Defaults
Save and Exit
Exit