Table of Contents
Advertisement
Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA HDD
power connector
USB 2.0 Header
(9-pin USB4_5)
(see p.10 No. 18)
WiFi/E Header
(15-pin WIFI/E)
(see p.10 No. 24)
1
DeskExpress Hot Plug Detection
Header
(5-pin IR1)
(see p.10 No. 21)
Internal Audio Connectors
(4-pin CD1)
(CD1: see p.10 No. 27)
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.10 No. 25)
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
power cable to the power
connect to the
power supply
connector of the power supply.
Besides four default USB 2.0
USB_PWR
P-5
ports on the I/O panel, there is
P+5
GND
DUMMY
one USB 2.0 header on this
motherboard. This USB 2.0
1
GND
header can support two USB
P+4
P-4
USB_PWR
2.0 ports.
This header supports WiFi+AP
USB+5V_2
TXN
function with ASRock
TXP
GND2
PCIE_RST#
WiFi-802.11g / WiFi-802.11n
+3SVB
RXN RXP
module, an easy-to-use wireless
local area network (WLAN)
PexCLK
GND1
PexCLK#
D0- D0+
PME#
USB+5V_1
adapter. It allows you to create a
wireless environment and enjoy the
convenience of wireless network
connectivity.
This header supports the Hot
IRTX
Plug detection function for
+5VSB
Hotplug#
ASRock DeskExpress.
1
GND
IRRX
This connector allows you
to receive stereo audio input
CD1
from sound sources such as
a CD-ROM, DVD-ROM, TV
tuner card, or MPEG card.
This is an interface for front
GND
PRESENCE#
panel audio cable that allows
MIC_RET
OUT_RET
convenient connection and
control of audio devices.
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
2 1
2 1
2 1
2 1
2 1
Advertisement
Table of Contents
