Comment
5-1-12 Backlight Color Switching (NT20M, NT2000M)
Format
Description
Caution
5-1-13 Screen Display Control
Format
Description
Comment
5-1-14 Buzzer Control
Format
Description
Comment
5-1-15 Mode Switch Enable
Format
Disabled touch switches and function keys are also enabled when the PT power
is turned off.
m
: Backlight color
1
0 (30
): white
H
1 (31
): red
H
Controls the backlight color.
This command is only valid for the following PTs:
NT20M-DT131
NT20M-DN131
NT2000M-DT131
NT2000M-DN131
m
: Display on or off
1
0 (30
): on
H
1 (31
): off
H
Turns off the backlighting of LCD and color-LCD model PTs; turns off the entire
display of EL model PTs.
This command can be used as a screen saver.
The screen is re-displayed when a key or switch is operated.
The specified screen is displayed when the when the Display Specified Screen
Command (refer to 5-1-1 Display Specified Screen ) is transferred.
m
: Buzzer status
1
0 (30
): Buzzer off
H
1 (31
): Continuous buzzer
H
2 (32
): Short intermittent buzzer
H
Controls the PT buzzer.
The buzzer turned on with this command can be stopped with a stop command,
by pressing the PT Buzzer Key, or by displaying a screen with no buzzer attrib-
utes.
[ESC]
O
m
1
1B
4F
[ESC]
P
m
1
1B
50
[ESC]
T
m
1
1B
54
[ESC]
W
m
1
1B
57
Section 5-1