Table of Contents
Advertisement
The Walking Data Management Screen consists of the following major areas.
Menu Area
Transfer the data from the step counter to the PC
1. Connect the USB cable from the Omron step counter to the PC. Click the [Download Data] icon.
NOTE: • The date shown by the software is determined by your PC. If you transfer the data at
midnight, data may be stored as a different date. (e.g. 11:59 PM on step counter and
12:00 AM next day on the PC). To avoid this situation, it is recommended not to transfer
the data at midnight, and to ensure the times on your PC and your Omron step counter
are set correctly.
2. The Confirm dialog appears. Click [Yes] to import the data.
NOTES: • If you connect a different step counter from
the last time you transferred the data, the
screen shows up to confirm.
• Data cannot be changed once it has been
transferred.
3. Start importing data. Click [Cancel] if you want to cancel.
4. The dialog appears when complete. Click [OK].
NOTE: • Do not turn the PC off or unplug the USB cable while the data being transferred.
Print the screen
Click the [Print] icon, then set up to print according to your needs.
Walking Data Management Screen
18
Menu Area
Data Display Area
Advertisement
Table of Contents
