System Configuration - Omron FQ - SHORT Manual

2-1 System Configuration

Standard Configuration
Setup Tool
Touch Finder or PC Tool
FQ Ethernet Cable
24-VDC power supply
Multiple Connection Sensors
Setup Tool
Touch Finder or PC Tool
Standard RJ45 Ethernet
Cable
Product
FQ Vision Sensor
Touch Finder
PC Tool
FQ Ethernet Cable
Standard RJ45 Ethernet
*1
Cable
I/O Cable
Switching Hub
*1: The shape and dimensions of the Ethernet connector plug and jack are specified in ISO/IEC8877:1992 (JIS X 5110:1996) and RJ-45 of the
FCC regulations.
To prevent connector connection failures, the structure of the jack of this product does not allow insertion of plugs that do not comply with the
standard.
If a commercially available plug cannot be inserted, it is likely that the plug is non-compliant.
Important
Do not connect network devices other than PLCs on the same network as the Touch Finder or computer. If
another device is connected, the responsiveness of displays and settings of the Touch Finder or computer may
become slow.
10

System Configuration

FQ Vision Sensor
I/O Cable
FQ Vision Sensors
(8 max.)
Switching Hub
FQ Ethernet Cable
Model number
FQ-S@@@@@@
FQ-D@@
---
FQ-WN0@@
---
FQ-WD0@@
W4S1-0@@
Trigger Sensor
24-VDC power
supply
Connect the trigger
sensor, PLC, and
power supply to
each Sensor.
Remarks
This is the Vision Sensor.
This is a setup console.
The PC Tool can be used instead of the Touch
Finder. If you register as a member, you can down-
load the free PC Tool as a special service to pur-
chasers.
Refer to the Member Registration Sheet that is
enclosed with the Sensor for the member registra-
tion procedure and the download procedure for spe-
cial member software.
Connects the Sensor to the Touch Finder or com-
puter.
Connects the switching hub to the Touch Finder or
computer. Use a connector that complies with the
FCC RJ45 standard. (STP (shielded twisted-pair)
cable, category 5e or 6, impedance: 100 Ω)
Connects the Sensor to the power supply and exter-
nal devices.
Used to connect multiple Sensors to one Touch
Finder or PC Tool.
PLC
FQ Short Manual