Advertisement
Quick Links
Miniature Square Inductive Proximity Sensor
E2S
• Miniature housing with long sensing ranges
• Front ans side facing sensing surfaces
5.5 mm
Ultra small housing
The 5.5 mm x 5.5 mm type permits smaller, space-saving ma-
chines and devices.
Adopted for more compact machines and devices.
5.5mm
E2S
Features
1 kHz
High-Speed Response
IP67
Environment-Resistant Types
Full sealing structure housing, degree of protection IEC60529 IP67.
Low Current Consumption (Com-
1/20
pared to conventional models)
Significantly lower current consumption. The 0.8 mA (for 24
VDC) leakage current for the DC 2-wire type has a ratio of ap-
proximately 1/20 compared to the conventional DC 3-wire
type. Optimum solution for multiple-sensor applications such
as cam switches.
D-61
Advertisement
Related Manuals for Omron E2S
Summary of Contents for Omron E2S
- Page 1 Significantly lower current consumption. The 0.8 mA (for 24 VDC) leakage current for the DC 2-wire type has a ratio of ap- proximately 1/20 compared to the conventional DC 3-wire type. Optimum solution for multiple-sensor applications such as cam switches.
-
Page 2: Ordering Information
Front face E2S-W21 * E2S-W22 2.5mm End face E2S-Q21 * E2S-Q22 * Models with different response frequency are available (NO only). These model numbers take the form E2S-###B (e.g., E2S-W11B) DC 3-wire Models Model Output Shape Sensing surface Sensing distance... - Page 3 * The response frequencies for DC switching are average values measured under the condition that the distance between each sensing object is twice as large as the size of the sensing object and the sensing distance set is half of the maximum sensing distance.
-
Page 4: Specifications
1,000 VAC for 1 min between energized parts and case Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock resistance Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions... -
Page 5: Output Circuit Diagram
Black Main circuit Output Sensing object E2S-W14 E2S-W24 Output transistor (load) Blue E2S-Q14 E2S-Q24 Operation indicator (orange) * Maximum load current: 50 mA Sensing object E2S-W15 E2S-W25 Brown Output transistor (load) E2S-Q15 E2S-Q25 Operation indicator (orange) Black Main circuit Load... - Page 6 Mutual Interference • Provide a minimum distance between the Sensor and the If more than one Sensor is located face to face or in parallel, surrounding metal as shown in the table below. be sure to maintain enough space between adjacent Sensors •...
-
Page 7: Dimensions (Unit: Mm)
2 / 3 cores (conductor 2.9 dia. vinyl-insulated round cable, sectional area: 0.14mm Indicator * 2 / 3 cores (conductor sectional area: Insulator diameter: 0.9 dia.) 0.14m‡u, Insulator diameter: 0.9 dia.) ; ; standard length: 1 m standard length: 1 m 3.1 dia. - Page 8 ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. E902-E2-02-X In the interest of product improvement, specifications are subject to change without notice. D-68 Inductive Sensors...