Table of Contents
Advertisement
System setup
SETTING UP THE AUDIO OPTIONS
Allows you to set up the Audio device and sound status
depending on the audio system being used with the player.
1. With the unit in Stop mode, press the MENU button.
2. Press the
buttons to select Setup, then press the
ENTER button.
3. Press the
buttons to select Audio Setup, then press
the ENTER or
button.
4. Press the
buttons to select the desired audio option
from the options described below, then press the ENTER
button.
5. Press the
buttons to select the desired item, then
press the ENTER button.
Note:
Press the RETURN or
menu.
Press the SETUP button to exit the menu.
Digital Outpt
Digital Output:
Select this when your equipment does not
decode Dolby Digital.
S/PDIF: Select this when your equipment connected Via
Optical / Coaxial cable.
HDMI Audio:
Select this when your equipment connected
Via HDMI cable.
PCM Down Sampling
On : Select this when the Amplifi er connected to the
player is not 96KHz compatible. 96KHz signals will be
down converted to 48KHz
Off : Select this when the Amplifi er connected to the
player is 96KHz compatible. Signals will be output
without any changes.
button to return to the previous
General
Video
Audio
Language
Parental
General
Video
Audio
Language
Parental
Select the audio signal output when playing Dolby Digital disc. This setting affects
the output from the DIGITAL OUT (COAXIAL or OPTICAL) jack
General
Video
Audio
Language
Parental
Select the output method from the S/PDIF out jack
General
Video
Audio
Language
Parental
37
Digital Output
PCM Down Sampling
Dynamic Compression
Digital Output
S/PDIF
PCM Down Sampling
HDMI Audio
Dynamic Compression
Digital Output
On
PCM Down Sampling
Off
Dynamic Compression
Advertisement
Table of Contents
