Connecting To An Audio System (2 Channelamplifier) - Curtis Mathes BLU-RAY DISC CMMBX72 Operation Manual

Connections
Connecting to an audio system (2 channel amplifier)
1. Using the audio cables (not included), connect the AUDIO (red and white) OUT terminals on the rear of the
Blu-ray disc player to the AUDIO (red and white) IN terminals of your Amplifier.
2. Using the video signal cable (s),connect the HDMI, COMPONENT, S-VIDEO or VIDEO OUT terminals on the rear
of the Blu-ray disc player to HDMI, COMPONENT, S-VIDEO or VIDEO IN terminal of your TV .
3. Turn on the Blu-ray disc player, TV and Amplifier.
4. Press the input select button of the Amplifier to select the external input in order to hear sound from the
Blu-ray disc player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
W
white
[NOTE]:
Manufactured under license from Dolby Laboratories. " Dolby" and the double-D symbol are trademarks of
Dolby Laboratories.
"DTS" and "DTS Digital Surround" are registered trademarks of DTS, Inc.
R
red
W
R
Audio Cable
(not included)
W R
L R
AUDIO IN
2-Channel stereo amplifier
24