Page 1
Long Distance Square Inductive Proximity Sensor E2Q4 Square Proximity Sensor • Slim, compact size • M12 Plug-in connection • Integrated short circuit and reverse polarity protection • Active face positioning: Y-axis 15°, X-axis 90° incremets Ordering Information DC type Output...
Page 2
Ambient humidity 35 to 95% RH Influence of temperature ± 10% max. of Sn at 23° in temperature range of -25° to 70°C Dielectric strength 1.500 VAC, 50/60 Hz for 1 min. between current carry parts and case Electromagnetic compatibility EMC...
Page 3
Indicator Proximity Black (yellow) Sensor main circuits E2Q4-N20E1-M1 E2Q4-N30ME1-M1 Blue Yellow indicator Connector Pin Arrangement Control output Note: Terminal 2 is not used Brown Non-sensing zone Sensing zone 4.7kΩ 4.7kΩ Load Sensing Operation object Indicator Black (yellow) Load Proximity...
Operation Sensing circuits Indicator object (yellow) Load 4.7kΩ E2Q4-N20F1-M1 Blue E2Q4-N30MF1-M1 Yellow indicator Connector Pin Arrangement Control output Note: Terminal 2 is not used Brown Non-sensing zone Sensing zone White Proximity Sensing Sensor object main Black circuits Load Operation Indicator...
Page 5
= Current consumption of the Sensor = Load current If the MY Relay, which operate at 24 VDC, is used as a load for example, a maximum of two Proximity Sensors can be connected to the load. A minimum of three Sensors with current outputs can be connected in parallel.
Proximity Sensor through a Relay ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. D02E-EN-01A In the interest of product improvement, specifications are subject to change without notice.
This manual is also suitable for:
E2q4-n20e1-m1E2q4-n20e3-m1E2q4-n20f1-m1E2q4-n20f3-m1E2q4-n30me1-m1E2q4-n30me3-m1...
Show all