Omron CX-MOTION - 06-2008 Operation Manual page 60

Editing Data
Editing Symbols
Editing Position Data
Editing Unit Settings
Editing Zone Settings
■ Drop-down List (Check Boxes)
Either click the ▼ button or press the Alt+
the desired setting to select that option.
■ Displaying the Window
With the project tree displayed, either double-click the desired MC Unit's sym-
bol or select the desired MC Unit's symbol and press the Enter Key.
■ Switching between Edit Symbols Tabs
Either system parameters or variables can be edited by clicking the corre-
sponding tab.
■ Editing in the System Parameters Tab
To edit the names of system parameters, click the System Parameters Tab
and either double-click the desired parameter or right-click the desired param-
eter and select Edit from the pop-up menu.
■ Editing in the Variables Tab
To edit the names of variables, click the Variables Tab and either double-click
the desired parameter or right-click the desired parameter and select Edit
from the pop-up menu.
A new variable can be added by right-clicking on the Variables Tab Page and
selecting Insert from the pop-up menu. Select or input the name, variable
type, data type, address, and comment in the displayed New Symbol Dialog
Box, and then press the OK Button.
■ Displaying the Window
With the project tree displayed, either double-click the desired MC Unit's posi-
tion data or select the desired MC Unit's position data and press the Enter
Key.
■ Displaying the Window
With the project tree displayed, either double-click the desired MC Unit's Unit
parameters or select the desired MC Unit's Unit parameters and press the
Enter Key.
■ Displaying the Window
With the project tree displayed, either double-click the desired MC Unit's zone
parameters or select the desired MC Unit's zone parameters and press the
Enter Key.
Section 5-1
i
Keys. Select the box to the left of
41