TABLE sAW Before reading, unfold both pages containing illustrations and familiarise yourself with all functions of the device. PTKS 1800 SE TABLE SAW GB / IE / CY Operation and Safety Notes Page Operation and Safety Notes Kompernaß GmbH Burgstraße 21...
Page 2
2 mm 2 mm ø 30 mm ø 30 mm 14 a 14 a 16 15 14 a HIGH HIGH 4 25 4 25 HIGH HIGH HIGH HIGH...
Included items .......................Page 7 Technical data .......................Page 7 Safety advice Working safely ......................Page 8 Safety advice relating specifically to this device ............Page 9 Original accessories / attachments ................Page 11 Preparing the device for use Preparation ........................Page 11 Integrated safety devices .....................Page 11 Assembly ........................Page 12...
Introduction The following icons / symbols are used in this instruction manual: Read instruction manual! Safety class II Wear hearing protection, dust Observe caution and safety notes! protection mask, protective glasses and protective gloves. Caution – electric shock! Keep children and other unauthorised Dangerous electric current –...
Angle stop (see Fig. L) Rated power: 1800 W Centimetre-scale No-load speed: 4,500 min Counter wrench (including 10 mm and 13 mm Cutting depth: max. 65 mm at 90° open-end spanner) max. 45 mm at 45° Combi-tool (6 mm Allen key / Phillips...
Do not use the mains lead to pull the plug out Avoid touching earthed objects such as pipes, of the mains socket. Protect the mains lead heating radiators, ovens or refrigerators with from heat, oil and sharp edges.
17. Avoid unintentionally starting up Safety advice relating the device. specifically to this device Check that the switch is set to OFF on the de- vice when the mains plug is inserted into the Safety precautions: Do not use blunt, cracked, distorted mains socket.
Page 8
Do not use HSS saw blades (high-alloy high- ing use. Damaged mains leads increase the speed steel). risk of electric shock. The push stick must always be kept in the vicini- ty of the machine. If you use the electrical power tool outdoors, always connect it through Operating the machine safely: a residual current device (RCD).
Always saw just one workpiece at a time. Workpieces placed one above the oth- Preparing the device for use er or side by side may jam the sawblade or slip with respect to one another during sawing. Preparation Always use the guide fence or the mitre guide.
The voltage must agree with that shown on the machine rating plate (equipment shown If there is still an overloading problem, check as 230 V can also be connected to 220 V). The whether: electrical circuit must be fitted with 16 A protection.
Keeping your table saw safe and secure WARNINg! Before you carry out any work on the device always pull the mains plug out of the Prevent unauthorised people from gaining mains socket. access to your table saw. Take care to see that no one can be injured by...
Hans Kompernaß - Managing Director - Information Service centre The service centre for your country is shown in the We reserve the right to make technical modifications in the course warranty documentation. of further development. GB/IE/CY...