Table of Contents
Advertisement
Using the plug-on transmitter
Using the plug-on transmitter
To establish a transmission link, proceed as follows:
1. Switch the receiver on (see the instruction manual of the receiver).
2. Switch the plug-on transmitter on (see next section).
The transmission link is established and the diversity receiver's RF level
display "RF" reacts.
It is vital to observe the notes on frequency selection on page 26.
If you cannot establish a transmission link between plug-on transmitter
and receiver, read the chapter "Synchronizing the plug-on transmitter
with a receiver" on page 26.
Switching the plug-on transmitter on/off
To switch the plug-on transmitter
Press the
ON/OFF
The plug-on transmitter transmits an RF signal. The red
ON
LED
display appears on the display panel. The transmission icon
is displayed.
To switch the plug-on transmitter on and to
switch-on
(offline operation):
Keep the
ON/OFF
appears on the display panel.
10
on
(online operation):
ON/OFF
button
lights up and the "Frequency/Name" standard
ON/OFF
button
.
deactivate the RF signal on
pressed until
"RF Mute
On?"
Advertisement
Table of Contents
