Sennheiser SKM 500 G3 - 02-09 Instruction Manual page 22

The following figures are a guide to the best settings:
Transmission situation
Loud music/vocals
Presentations
Interviews
Selecting the frequency bank and the channel manually –
"Frequency Preset"
Menu
Frequency Preset
B.Ch: 1. 1
Call up "Frequency
Preset"
When you are in the
the RF signal is deactivated.
Overview of the frequency banks and channels:
Frequency
bank
"1" to "20"
"U1" to "U6" up to 32 per
When setting up multi-channel systems, please
observe the following:
Only the factory-preset frequencies within one
frequency bank are intermodulation-free (see
page 26).
Radio microphone and receiver of a transmission
link have to be set to the same frequency.
It is vital to observe the notes on frequency
selection on page 26.
Entering a name – "Name"
Menu
Name
Lichael
Call up "Name"
Via the "Name" menu, you can enter a freely selectable
name (e.g. the name of the performer) for the radio micro-
phone.
Adjusting settings via the operating menu
Frequency Preset
B.Ch: 1. 1
542.625
Select the frequency
bank and confirm
"Stored"
"Frequency
Channels
up to 32 per
frequency
bank
frequency
bank
Name
Lichael
Enter a character
and confirm
"Stored"
Sensitivity setting
−48 to −18 dB
−18 to −12 dB
−12 to 0 dB
MHz
Preset" menu item,
Type
System bank:
frequencies are factory-
preset
User bank:
frequencies are freely
selectable
Frequency
B.Ch: 20. 1
533.875 MHz
Select the channel;
store the setting
Name
Michael
Enter a character;
store the setting
21