Sennheiser SKM 500 G3 - 02-09 Instruction Manual page 14

You can switch the radio microphone on and
vate the RF signal on
tion, see next section.
To switch the radio microphone off:
If necessary, deactivate the lock mode (see page 14).
Keep the
ON/OFF
appears on the display panel. The red
goes off and the display panel turns off.
When in the operating menu, pressing the ON/
OFF button
and return you to the current standard display.
To switch the radio microphone on and to
RF signal on switch-on
Keep the
ON/OFF
On?" appears on the display panel.
Press the multi-function switch.
The transmission frequency is displayed but the
radio microphone does not transmit an RF signal.
The transmission icon
the pilot tone function is activated on both radio
microphone and receiver,
the receiver's display panel.
Use this function to save battery power or to
prepare a radio microphone for use during live oper-
ation without causing interference to existing trans-
mission links.
To activate the
Briefly press the
ON/OFF
"RF Mute
Press the multi-function switch.
The transmission icon
ON/OFF button
will cancel your entry (ESC function)
(offline operation):
ON/OFF button pressed until
MHz
542.625
ew500 G3
P
MUTE
AF
RF signal:
ON/OFF
Off?" appears on the display panel.
Using the radio microphone
switch-on. For more informa-
pressed until "OFF"
is not displayed. When
"RF Mute" appears on
button.
is displayed again.
deacti-
ON LED
deactivate the
"RF Mute
13