Sennheiser SKM 300 G3 - 01-09 Instruction Manual page 27

Adjusting settings via the operating menu
Devices of the ew 300 G1 series (generation 1) do not
support the pilot tone function. Therefore, please observe
the following when combining a radio microphone or
receiver of the ew 300 G3 series (generation 3) with
devices from an earlier evolution wireless generation:
Radio
microphone
w G3/ w G2
w G3
w G1
Adjusting the contrast of the display panel –
"LCD Contrast"
You can adjust the contrast of the display panel in 16 steps.
Resetting the settings made in the operating menu –
"Reset"
Advanced Menu
Reset
Call up "Reset"
When resetting the settings made in the operating menu,
only the selected settings for the pilot tone and for the
frequency banks "U1" to "U6" remain unchanged.
For an overview of the factory-preset default settings, refer
to the supplied frequency information sheet.
Displaying the software revision – "Software Revision"
You can display the current software revision of the radio
microphone.
For information on software updates, visit the
SKM 300 G3 product page at www.sennheiser.com.
26
Receiver
w G3/ w G2
w G1
w G3
Reset
Yes
Select the desired
setting; apply the
setting
"Stored"
Make sure to ...
... activate the pilot
tone function on both
radio microphone and
receiver.
... deactivate the pilot
tone function on the
ew 300 G3 radio
microphone.
... deactivate the pilot
tone function on the
ew 300 G3 receiver.