Sennheiser SKM 300 G3 - 01-09 Instruction Manual page 26

Setting the mode for the MIC button – "Mute Mode"
Advanced Menu
Mute Mode
AF On/Off
Call up
"Mute Mode"
Setting
"AF On/Off"
"RF On/Off"
"Push To Mute"
"Push To Talk"*
"Disabled"
* If you select
muted until the
For information on how to use the
page 14.
Adjusting the transmission power – "RF Power"
Advanced Menu
RF Power
Standard
Call up
"RF Power"
Via the "RF Power" menu item, you can adjust the transmis-
sion power in two steps.
It is vital to observe the notes on the supplied
frequency information sheet.
Activating/deactivating the pilot tone transmission –
"Pilot Tone"
Advanced Menu
Name
Pilot Tone
Active
Call up
"Pilot Tone"
The radio microphone adds an inaudible signal, known as
the pilot tone, to the transmitted signal. The receiver
detects and evaluates the pilot tone.
The pilot tone supports the receiver's squelch function
(Squelch) and protects against interference due to
RF signals from other devices.
Adjusting settings via the operating menu
Mute Mode
AF On/Off
Select the desired
setting
"Stored"
Function
If you press the
audio signal is muted.
If you press the
radio signal is deactivated.
The audio signal is muted as long as
you press the
The audio signal is activated as long
as you press the
The function is deactivated.
"Push To Talk", the radio microphone will be
MIC button is pressed.
RF Power
Standard
Select the desired
setting
"Stored"
Pilot Tone
Active
Select the desired
setting
"Stored"
Mute Mode
RF On/Off
Store the setting
MIC button, the
MIC button, the
MIC button.
MIC button.
MIC button, refer to
RF Power
Low
Store the setting
Pilot Tone
Inactive
Store the setting
25