Sennheiser SK 5212-II - ANNEXE 762 Instruction Manual page 23

Adjustment tips for the operating menu
When operating a multi-channel system, make sure to only use intermodulation-free
frequencies.
There are two options for setting the frequencies:
• You can set a new frequency for the selected channel:
SET
UP
DOWN
CH
CH
MHz
MHz
• You can change to a different channel and set a new frequency for the new channel:
SET
UP
DOWN
CH
CH
RF
CH
CH
MHz
MHz
22
In the selection mode of the "TUNE" menu, press the multi-function
switch (switch position
appears on the LC display panel and then the currently assigned
frequency is displayed.
Change the frequency by sliding the multi-function switch
position (UP) or
Store your setting.
Press the multi-function switch
longer time. The current channel flashes on the LC display panel.
Select a new channel by sliding the multi-function switch
(DOWN).
Confirm your selection by pressing the mult-function switch (switch
position SET).
The current frequency of the selected channel is displayed.
Change the frequency by sliding the multi-function switch
position (UP) or
Store your setting.
SET). The current channel number
(DOWN).
(switch position
(DOWN).
to the
SET) for a
(UP) or
to the