Specifications - Sennheiser SK 5212-II Instruction Manual

Specifications

Modulation
Frequency range
Switching bandwidth
Transmission frequencies
RF output power
Frequency stability
Nominal/peak deviation
Signal-to-noise ratio
THD
(at 1 kHz, nominal deviation)
AF frequency response
Noise reduction system
Input sensitivity at
nominal deviation
Low-cut frequency (–3 dB)
Sensitivity
Power consumption
(without LC display illumination)
Operating time
wideband FM
range 1 (L):
range 2 (N/N-US):
range 3 (P):
up to 184 MHz
frequency bank "FIX" with up to 59 factory-preset
frequencies
frequency bank "VAR" with 20 freely selectable
frequencies (frequencies tuneable in steps of 5 kHz)
switchable,
typ.: 50 mW (PWR.Hi)
10 mW (PWR.LO)
10 mW (PWR.LoI)
±10 ppm in the specified temperature range
±40 kHz/±56 kHz
typ. 110 dB(A)
rms
< 0.3 %
60 to 20,000 Hz
Sennheiser HiDynplus™
–40 dBu = 7.75 mV
adjustable (flat, 120 Hz)
adjustable in steps of 1 dB from –30 to +40 dB
PWR.LO: approx. 150 mA (10 mW) at 1.5 V
PWR.HI: approx. 220 mA (50 mW) at 1.5 V
PWR.LoI: approx. 220 mA (10 mW) at 1.5 V
PWR.LO: approx. 11 hrs
PWR.HI: approx. 5.5 hrs
PWR.LoI: approx. 5.5 hrs
470 to 638 MHz
614 to 798 MHz/614 to 697.9 MHz
776 to 866 MHz
Specifications
29