Specifications - Sennheiser SKP 100 G3 Instruction Manual

Specifications

RF characteristics
Modulation wideband FM
Frequency ranges 516–558, 566–608, 626–668,
734–776, 780–822, 823–865 MHz
(A to E, G, see page 3)
Transmission frequencies 1,680 frequencies,
tuneable in steps of 25 kHz
20 frequency banks, each with up to
12 factory-preset channels
1 frequency bank with up to
12 user programmable channels
Switching bandwidth 42 MHz
Nominal/peak deviation ±24 kHz/±48 kHz
≤ ± 15 ppm
Frequency stability
RF output power at 50 Ω
typ. 30 mW
Pilot tone squelch can be switched off
AF characteristics
Compander system Sennheiser
AF frequency response 80–18,000 Hz
Signal-to-noise ratio
≥ 110 dBA
(1 mV RF, peak deviation)
≤ 0.9%
THD
Max. input voltage 3.3 V
Input impedance 60 kΩ, unbalanced
Adjustment range of input 48 dB,
sensitivity adjustable in steps of 6 dB
Overall device
Temperature range –10°C to + 55°C
Power supply 2 AA size batteries, 1.5 V
or BA 2015 accupack
Nominal voltage 2.4 V
Power consumption
• at nominal voltage typ. 180 mA
• with switched-off
≤ 25 xA
transmitter
Operating time typ. 8 hrs
Dimensions approx. 105 mm x 43 mm x 43 mm
Weight (incl. batteries) approx. 195 g
In compliance with
Europe EMC
Radio
Safety
Approved by
Canada Industry Canada RSS 123
IC: 2099A-G3SKP
limited to 806 MHz
USA FCC-Part 74
FCC-ID: DMOG3SKP
limited to 698 MHz
Specifications
HDX
rms
EN 301489-1/-9
EN 300422-1/-2
EN 60065
EN 62311 (SAR)
21