Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Sennheiser SK 3063
Summary of Contents for Sennheiser SK 3063
- Page 1 SK 3063-U Instruction Manual...
-
Page 3: Table Of Contents
Sennheiser a world-leading company in this field. Please take a few moments to read these instructions carefully, as we want you to enjoy your new Sennheiser products quickly and to the fullest. -
Page 4: Important Safety Instructions
Important safety instructions • Please read this instruction manual carefully and completely before using the device. • Make this instruction manual easily accessible to all users at all times. Always include these instructions when passing the device on to third parties. •... -
Page 5: Sk 3063-U Mikroport Bodypack Transmitter
Together with a connected microphone, the transmitter can be used as a wireless microphone. Due to its small dimensions and extremely flat design, the SK 3063-U is especially suitable for all applications where a very unobtrusive transmitter is required, e.g. -
Page 6: Delivery Includes
Delivery includes The packaging contains the following items: 1 SK 3063-U bodypack transmitter with belt clip 1 B 50 battery pack 1 antenna 1 set of colour-coded identification markers 1 instruction manual Product overview Antenna socket Channel selector switch Type plate... -
Page 8: Putting The Sk 3063-U Transmitter Into Operation
Unscrew the coupling ring inorder to unlock the special audio connector of the microphone. Attaching and removing the battery pack For powering the SK 3063-U transmitter, you can either use the B 50/B 250 battery pack or the rechargeable BA 50/BA 250 accupack. - Page 9 To attach the B 50/B 250 battery pack: Using the thumb and index finger of one hand, push the two catches on the transmitter as shown in diagram A. The battery pack can now be removed from the transmitter. Insert the batteries into the battery compartment as shown in diagram or C.
-
Page 10: Attaching And Removing The Accupack
The B 50/B 250 battery pack The B 50/B 250 battery pack has the following features: • 3-step LC display for (remaining) battery capacity • Reliable Low Batt indication • Protection against total discharge • Provision of battery status information to the receiver Attaching and removing the accupack Using the thumb and index finger of one hand, push the two catches... - Page 11 • Display indicates the maximum possible capacity after the accupack has been fully charged in the L 50 charger • Measurement of actual capacity and consideration of natural ageing • During operation, the percentage display decreases in correspondence to the remaining accupack capacity Discharge the accupack from time to time The capacity is calculated during a complete discharge cycle (between full charge and “Low Batt”...
-
Page 12: Attaching The Transmitter To Clothing
Attaching the transmitter to clothing The transmitter is attached to clothing (e.g. belt, waistband) with the supplied belt clip. The clip is detachable so that you can also attach the transmitter with the cable and the antenna pointing downwards. Withdraw the clip from its fixing points and attach it the other way round. -
Page 13: Using The Sk 3063-U Transmitter
Using the SK 3063-U transmitter Switching the transmitter on Attach the power pack to the transmitter. To switch the transmitter on, set the on/off switch to ON. The red operation indicator lights up. If the operation indicator does not light up, check the power pack. -
Page 14: Adjusting The Sensitivity
Adjusting the sensitivity The sensitivity switch allows you to adjust the gain of the microphone input in 8 steps. To provide for an accurate setting, use a receiver fitted with a deviation indicator when adjusting the sensitivity. The sensitivity is set correctly when the PEAK LED flashes brightly only during peak levels. -
Page 15: Specifications
Frequency stability ±5 ppm Spurious emission < 4 nW Modulation Nominal/peak deviation ±40 kHz/±56 kHz Noise reduction system Sennheiser »HiDynPlus« Input sensitivity for peak deviation, adjustable in 8 steps 13.2 mV−1.55 V AF frequency response 50 Hz−18 kHz Dynamik 112 dB (A) <... - Page 16 Operating time with alkaline-manganese cells B 50-2 4.5 hrs with SK 50/SK 3063 B 250-2 > 9 hrs with SK 50/SK 3063 > 2.5 hrs with SK 250 Operating time with NiMH rechargeable batteries BA 50 > 6 hrs BA 250 >...
-
Page 17: Accessories
Accessories The following accessories are available from your specialist dealer: Cat. No. Accessory/spare part 003972 SK 50-T transmitter bag... -
Page 18: Manufacturer Declarations
Manufacturer declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our web site at www.sennheiser.com or contact your Sennheiser partner. 0682 CE Declaration of Conformity... - Page 19 Statements regarding FCC and Industry Canada This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 20 Changes or modifications made to this equipment not expressly approved by Sennheiser electronic Corp. may void the FCC authorization to operate this equipment. Before putting the device into operation, please observe the respective country-specific regulations!
- Page 21 Sennheiser electronic GmbH & Co. KG Am Labor 1 30900 Wedemark, Germany Phone +49 (5130) 600 0 Printed in Germany Fax +49 (5130) 600 300 Publ. 03/2009 www.sennheiser.com 078329/A01...