Sennheiser SI 1015-4000 SINGLE Product Sheet

SI1015-4000 Single System Package
Wireless | Systems
System Includes:
(1265.35 mm)
(1) SI1015—Two channel modulator
(1) NT1015-120—29 V DC power supply
(1) GA1031-CC—Rack adapter
(1) SZI1015—Emitter panel
(1) WM1—Wall/ceiling mount
(5) RI250—Single channel infrared stethophone receiver
(1) L151-10/NT—Charging unit with power supply
RF Output 2
(1) NT92-120—AC adapter for L151-10 charging unit
(BNC)
RF Output 1
(BNC)
RF Output
Termninal 1
DC Output
Termninal 1
General Description
Sennheiser offers system packages that include all components necessary
to configure a complete system. Sennheiser's Large-Area Infrared Systems provide
coverage of 4,000 sq. ft. up to 12,500 sq. ft. in both single and dual channel
modes. The SI1015 modulator and SZI1015 or SZI1029 emitters are the primary
components of the systems. The NT1015-120 will provide power for the SI1015
modulator and up to two SZI1015 or SZI1029 emitters. The SZA1060 terminat-
ing resistor (50 ohm), for the last emitter in a daisy chain, is included for system
designs that incorporate daisy chaining of emitters. The GA1031-CC rack adapter
allows for easy mounting of a SI1015 modulator to a 19" rack. The WM1 wall/
ceiling mount easily mounts the SZI1015 or SZI1029 emitter panels. The RI250
4.571"
(116.10 mm)
stethophone infrared receivers are for use with single channel systems operating at
2.3 MHz, and include the BA151 rechargeable battery. Alternatively, for dual channel
systems, the HDI302 stethophone infrared receiver is for use with systems
operating at 2.3/2.8 MHz, and also includes the BA151 rechargeable battery. The
BA151 rechargeable batteries can be conveniently recharged with the L151-10
charging unit(s) with the NT92-120 power supply. In addition, the NT2013-120
will power two to five L151-10 charging units.
Adjusting
Knob
SI1015
7.000"
(177.80 mm)
49.817"
(1265.35 mm)
Power Supply
NT1015–120
6.660"
(169.16 mm)
RF Output 2
(XLR-3F)
(BNC) Audio Input B
Audio Input A
RF Output 1
(XLR-3F)
(BNC)
DC Input Socket
(For NT1015-120)
RF Output RF Output
Cable Grip
Termninal 2
Termninal 1
Strain Relief
DC Output DC Output
Termninal 2
Termninal 1
SI1015–Rack mountable, half rack, two channel modulator. Operates at
2.3/2.8 MHz. NT1015-120 power supply required.
* Illustrations do not show NT1015-120 power supply, GA1031-CC rack
adapter, NT92-120 adapter
3.620"
(91.95 mm)
7.000"
(177.80 mm)
49.817"
2.360"
(59.94 mm)
Power Supply
NT1015–120
9.040"
(229.62 mm)
6.660"
(169.16 mm)
10.350"
(XLR-3F)
(262.89 mm)
Audio Input B
Audio Input A 9.680"
ON/OFF
(XLR-3F)
(245.87 mm)
Switch
DC Input Socket
(For NT1015-120) IR Monitoring Diodes
RF Output
Level Control A
Cable Grip Channel Selector Switch
Termninal 2
Strain Relief
DC Output
Level Control B
Termninal 2
3.318"
(84.28 mm)
Ratchet Adjustment
For Angle
RF Output (BNC)
MONO/Multi Switch
RF Input (BNC)
ø1.936
(49.17 mm)
2.724"
(69.19 mm)
ø.161
5.286"
(4.09 mm)
(134.26 mm)
Replaceable
ø.743
ear cushions
(44.27 mm)
Mounting Plate
ø.1242
(31.55 mm)
3.620"
(91.95 mm)
Two IR
(187.71 mm)
72.000"
Receiving Diodes
(1828.80 mm)
(behind plastic cover)
2.360"
(59.94 mm)
Power Cord
1.467"
(37.26 mm)
9.040"
(229.62 mm)
ON/OFF
Volume Inserted BA151
Rechargeable
Control
Battery
10.350"
(262.89 mm)
9.680"
ON/OFF
(245.87 mm)
Switch
1.688"
(42.88 mm)
IR Monitoring Diodes
Level Control A Channel Selector Switch
Level Control B
72.000"
(1828.80 mm)
Power Cord
1.688"
(42.88 mm)
Convection Cooling Fins
10.270"
(260.86 mm)
IR Transmission Diodes
(behind cover)
4.970"
5/8" External (126.24 mm)
Thread
RF Input Terminals
DC Input Terminals
DC Output Terminals
RF Output Terminals
5/8" Thread for mounting
(3/8" X 1/2" Adapters included)
ø.752
(19.10 mm)
7.390"
SI1015
SZI1015
WM1
RI250
L151–10NT
SI1015-4000
Single
LED Indicator
Trickle Charge
(Green)
Button:
Press to begin
10 HR charge cycle
LED Indicator
Charge (Red)
Charging for
RI250, HDI302
Infrared Receivers
(Up to ten)
1.500"
(38.10 mm)