Switching The Mains Voltage / Mains Connection - Sennheiser EM 3031-U Instructions For Use Manual

7 Switching the mains voltage
Before you plug the mains connector into the mains, please check first of all
that the receiver is set to the correct mains voltage!
You can switch the mains voltage by removing the fuse holder
it through 180 and inserting it again
the fuse holder.
Mains connection
Insert the mains cable supplied into the socket
traction relief .
Because of the traction relief, the cable can no longer slip out of socket
Note
A straw relief clamp is particularly important when the receiver is permanently
rack mounted. Inside the rack there are often a large number of cables - a straw
relief clamp bracket prevents the cables from pressing each other out.
, . The rated voltage set can now be seen at the top of
on the receiver and pass the cable through the
with the inserted fuse
and interrupt operation.
, turning
37