Sennheiser EM 2000 - 01-09 Instruction Manual page 28

Set the desired frequency bank.
Set the desired channel.
Set the desired frequency.
Changing the settings of the guitar tuner
Advanced Menu
Tune
The following settings are available:
Guitar Tuner
Setting
Sync Settings
Pilot Tone
"Inactive"
Warnings
"Active"
LCD Contrast
Reset
IP-Address
"Audio
Software Revision
Exit
Calling up the "Sync Settings" submenu
Advanced Menu
To call up the
Tune
Guitar Tuner
From the extended menu
Sync Settings
Pilot Tone
Warnings
LCD Contrast
Reset
IP-Address
Software Revision
Exit
Activating/deactivating the pilot tone evaluation
Advanced Menu
Tune The transmitter adds an inaudible signal, known as the pilot tone, to the transmitted signal.
Guitar Tuner
The receiver detects and evaluates the pilot tone. The pilot tone supports the receiver's
Sync Settings
squelch function, thus protecting against interference due to RF signals from other devices.
Pilot Tone
Receiver display
Warnings
LCD Contrast
PEAK
40
Reset
-10
30
IP-Address
-20
20
Software Revision
-30
10
-40
Exit
RF AF
PEAK
40
-10
30
-20
20
-30
10
-40
RF AF
PEAK
40
-10
30
-20
20
-30
10
-40
AF
RF
Meaning
The "Guitar Tuner" standard display is deactivated.
When selecting the
the receiver is not
Mute" When selecting the
the receiver is muted.
"Sync Settings" submenu (see page 29):
"Advanced
Meaning
The pilot tone evaluation
B.Ch: 20.24
ew300 G3
0
531.375
MHz
EQ SKM300
+ 12dB
MUTE
The pilot tone evaluation
B.Ch: 20.24
ew300 G3
0
531.375 MHz
EQ SKM300
+ 12dB
MUTE
The pilot tone evaluation
B.Ch: 20.24
ew300 G3
0
receives a pilot tone from a transmitter.
531.375
MHz
EQ SKM300
P + 12dB
MUTE
"Guitar Tuner" standard display (see page 16),
muted.
"Guitar Tuner" standard display (see page 16),
Menu", select "Sync Settings".
Adjustment tips and functions
is deactivated.
is activated.
is activated and the receiver
27